Sharp LC-20M4E, Руководство по эксплуатации

Страница: 10 / 51

8
Basic Operation
1
Press Main Power, located on the
front side of the main unit.
2
The Power/Standby indicator
instantaneously changes from red to
green and the main unit is turned on.
Notes:
■
When the Power/Standby indicator is red,
press ON/OFF on the remote control to turn
on the monitor.
The Power/Standby indicator changes from
red to green.
■ The input mode indication disappears after
five seconds.
Turning on Main Power
Switching the AV INPUT [AV1/AV2] Mode
Initial mode (AV1)
1
Turn on the power of the connected
video equipment.
2
Press AV INPUT and select the
applicable input source. The screen
displays AV1 or AV2 mode at the
upper right corner each time AV
INPUT
is pressed.
Note:
■
The AV input mode indication remains for
five seconds.
• AV1: Select AV1 when video equipment is
connected to the AV 1 IN terminals.
The display of the AV1 mode indicates
either AV1 or COMPONENT depend-
ing on the adjustment of the FEA-
TURE settings.
AV1 is displayed when AV1 is set to
NORMAL in the FEATURE settings,
and COMPONENT is displayed when
AV1 is set to COMPONENT.
(see page 14)
• AV2: The AV2 mode can be set to either IN
or OUT in the FEATURE settings.
(see page 14)
AV2 indication is not displayed when
the mode is selected to OUT.
Power/Standby
indicator
LCD MONITOR
SELECT
SELECT
VOL VOL
MENU
MUTE
AV INPUT
ON/OFF
AV INPUT
ON/OFF
Control section of main unit
▼
On-screen display
AV1
PAL
AV1
AV2
AV1 mode
AV2 mode
Main Power