Sharp LC-13C2M, Руководство по эксплуатации

Страница: 16 / 123

16
1
Press the MENU (PRESET-
1
)
front of the LCD TV set for more
than two seconds. The AUTO
mode screen appears.
2
Press the MENU (PRESET-
1
) to
display the MANUAL mode screen.
Press the MENU (PRESET-
1
)
again to change the MANUAL
mode as shown below.
3
Select the channel position using
the CHANNEL SELECT or
CH (
)/( ).
4
Press the VOL (+)/(–) to locate the
channel you want to preset to the
position. Search is initiated and
when a TV signal is received
during the search, the search
stops.
5
Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
6
Press the MENU (PRESET-
1
) to
return to the normal screen.
Note:
■
SOUND SYSTEM may not have been set
correctly, if noise can be heard or if there
is no sound.
In such case, reset to SOUND SYSTEM
using the MENU.
■
In a weak reception area, or under
bad reception conditions.
1
Press the MENU (PRESET-
1
)
front of the LCD TV set for more
than two seconds. The AUTO
mode screen appears.
2
Press the MENU (PRESET-
1
) to
display the MANUAL mode screen.
3
While the MANUAL mode screen
is displayed, press the MENU for
more than 2 seconds.
The channel position number
remains in green.
■
While the MANUAL mode screen is
displayed, press the MENU button.
(The LANGUAGE mode screen will
appear.)
4
Adjust for good reception using the
VOL (+)/(–).
5
After finishing the adjustment,
press the MENU (PRESET-
1
) to
continue channel presetting.
PRESET (Continued)
Sound System
Channel position
number
AUTO
→
MANUAL
→
LANGUAGE
→
NORMAL
SCREEN
■
Setting a channel to a desired TV
station:
Presetting the Channels (MANUAL)
Auto mode screen
Manual mode screen
➡➡
Note:
Front control panel
CH
VOL
TV/VIDEO
DISPLAY
BRIGHT SLEEP
MENU
POWER
MPX
-/--
MENU
VOL(+)/(–)
CH ( )/
( )
CHANNEL
SELECT
1,2,6 3
MENU
CH VOL
TV/VIDEO
1 2 PRESET
4
1,2,3,5
MENU
CH VOL
TV/VIDEO
1 2 PRESET
4
L A N G U A G E
E N G L I S H
MENU
S E L E C T : E X I T :
Downloaded from: http://www.usersmanualguide.com/