Sharp LC-13C2M, Руководство по эксплуатации

Страница: 13 / 123

13
1
Press the button.
2
If “5–” is indicated and the picture
does not change, press the
-/--
button to switch over to the 1-digit
select mode and press
again.
BASIC OPERATION (Continued)
Changing the Channels
Changing channels using the CHANNEL SELECT on the remote control
To select a one-digit channel
(e.g., Channel 5):
• To handle the increasing number of channels available, this LCD TV set allows you to select up to
100 positions (Channels 0 to 99). One-digit and two-digit methods of selection can be used. Follow
the procedure shown below to select channels.
1
Press the
-/--
button to set the 2-
digit select mode.
2
Press the button.
3
Press the button.
To select a two-digit channel
(e.g., Channel 15):
■
Complete this procedure within 4 seconds,
otherwise the selection will not be made.
Changing channels with the CH ( )/( ) on the remote control.
Press the CH ( ) and the channels change in the order shown below:
1
→
2
→
3
→
. . .
→
98
→
99
→
0
→
1
→
2
→
3
→
. . .
Press the CH ( ) button and the channels change in the order shown below:
3
→
2
→
1
→
0
→
99
→
98
→
. . .
→
3
→
2
→
1
→
. . .
Note:
CH
VOL
TV/VIDEO
DISPLAY
BRIGHT SLEEP
MENU
POWER
MPX
-/--
CHANNEL
SELECT
CH ( )/
( )
B/G
B/G
Downloaded from: http://www.usersmanualguide.com/