manualshive.com logo in svg

Sharp KS-1800, Руководство по обслуживанию

Поделиться
Скачать
Sharp KS-1800 Скачать руководство пользователя страница 6

6

1.  Remove the bottom cover in accordance with “REMOVE OF BOTTOM COVER”.

2.  Upside down the rice cooker and disconnect lead wires from the micro switch. 

3.  Remove the screw holding the micro SW. to the switch leg ass’y.

4.  Now the micro SW. is free.

REMOVE OF MICRO SWITCH

Fig. 3

Micro SW.

Screw

Switch leg ass’y

Blue lead wire

White lead wire

Red lead wire

Blue lead wire

1.  Remove the bottom cover in accordance with “REMOVE OF BOTTOM COVER”.

2.  Remove the micro switch in accordance with “REMOVE OF MICRO SWITCH”.

3.  Pull the stop ring holding the switch leg ass’y to the thermostat rod.

4.  Remove 2 screws holding the switch leg ass’y to the outer pot.

5.  Now the switch leg ass’y is free.

Note : When mounting the switch assembly, lock it in a manner that the switch button will not come in contact

 

     with the panel.

REMOVE OF SWITCH LEG ASSEMBLY

Thermostat ass’y

Outer pot

Switch leg ass’y

Thermostat rod

Stop ring

Screw

Fig. 4

1.  Remove the bottom cover in accordance with “REMOVE OF BOTTOM COVER”.

2.  Fixing the thermostat rod, pull the stop ring by using the pliers and straightening 2 claws of thermostat.

3.  Remove thermostat from the outer pot.  Fig. 4

4.  Now the thermostat ass’y is free.

REMOVE OF THERMOSTAT ASSEMBLY

Содержание KS-1800





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды