6
INSTALLATION MANUAL
ADJUSTABLE BACKSPLASH
The range backsplash is adjustable so that you can customize it
for your particular kitchen situation. The height can be adjusted
from the low position (6-inches high) to the highest position
(12-inches high) in one inch increments.
Figure 12
2
Slide rubber gasket on back edge of cooktop back frame as
shown in Figure 13.
4
Slide backsplash in to desired height. Secure into position
with screws supplied and those removed in step 1.
1 Backsplash
Cooktop Back
Frame
Cooktop Back Frame
End Caps
1 Rubber Gasket
Rubber
Gasket
4 Screws
Parts Supplied
IMPORTANT
This backsplash must be installed before the range is moved
into place.
1 Backsplash
Cooktop Back
Frame
Cooktop Back Frame
End Caps
1 Rubber Gasket
Rubber
Gasket
4 Screws
Parts Supplied
1
Remove screw from the cooktop back frame end cap on
both sides and screw from range back cover on both sides,
as shown in Figure 12.
Note:
Set screws to the side to use for mounting the
backsplash. The two back plate screws must be placed back
into the back cover.
Figure 14
Figure 13
3
Carefully pull each end cap back slightly—no more than
1/8-inch—to facilitate installing the backsplash.
End cap
Back cover
Back cover screw
No more
than 1/8"