EN - 32
the inner frame do not require cleaning.
However; depending on usage, it is re-
commended that you replace them after
a certain period of time.
MAINTENANCE
Replacing the Oven Light
The change of oven lamp must be done
by authorized technician. The rating of
the bulb should be 230V, 25Watt, Type
E14,T300 before changing the lamp,the
oven should be plugged off and it sho-
uld be cool.
The lamp design is specific for the use
in household cooking appliances and it
is not suitable for household room illu-
mination.
CLEANING AND
MAINTENANCE OF YOUR
OVEN
CLEANING
Before starting to clean your oven, be
sure that all control buttons are off and
your appliance is cooled off. Unplug the
appliance.
Do not use cleaning materials conta-
ining particles that might scratch the
enamelled and
painted parts of your oven. Use cream
cleaners or liquid cleaners, which do not
contain particles. As they might ahrm
the surfaces, do not use caustic cre-
ams, abrasive cleaning powders, rough
wire wool or hard tools. In the event the
excess liquids spilling over your oven
should burn, it may cause a damage to
the enamel. Immediately clean up the
split liquids. Do not use steam cleaners
for cleaning the oven.
Cleaning the interior of the
oven
Make sure to unplug the oven before
starting to clean it. You will obtain best
results if you clean the oven interior
while the oven is slightly warm. Wipe
your oven with a soft piece of cloth
dampened with soap water after each
use. Then wipe it again, this time with a
wetted cloth, and wipe it dry. A complete
cleaning using dry and powder type cle-
aners. For product with catalytic enamel
frames, the rear and side walls of