Sharp IG-GC2EU, Руководство по эксплуатации

Страница: 109 / 115

E-9
Every 6 months or more often if necessary
How to remove the unit holder
1. Remove the filter cover.
(see E-8)
2. Pull up the main unit cover.
3. Pull out the unit holder.
Main Unit
Cover
Unit Holder
Remove dusts from the electrodes by the unit cleaning brush (see E-4).
Around the base
Before Cleaning After Cleaning
Electrode
Connection
Terminal
Reattach the unit holder, unit cleaning brush, main unit cover and filter
cover.
Please wire the power cord correctly.
Incorrect wiring could lead to damage to the power cord and may cause fire /
electric shock.
①
②
③
④
Micro USB Plug
Insert the Micro USB Plug for
connection with main unit to the
power supply port 1.
Put the power cord on 2 and 3.
Insert the power cord into the claw of 4.
When attaching the main unit cover,
put the power cord through the hole
on the main unit cover.
• Do not clean with anything other than the unit cleaning brush. (Doing so could
lead to failures in the unit)
• A bent electrode could be cut off and dropped during the cleaning process, but
it will not change the performance.
• Do not touch the electrode directly. (Doing so could lead to pain / itching)
• Do not deform the electrodes. (Doing so could lead to failures in the unit)
• Do not touch the connection terminal. (Doing so could lead to failures in the
unit)
Plasmacluster Ion Generating Unit (Electrode section)
2
1
3