Sharp IB-HX9KA, Руководство по эксплуатации

Страница: 16 / 46

E-14
Slide up from the hairline on the back of the
head for three to five seconds. ( ) If this
step is difficult for you, you can slide from the
top to the hairline on the back. ( )
IB-HX9KA
How to massage
SCALP MASSAGER
1
2
3
4
E-10 Page
How to massage
From the forehead to the back of the head
From the sides to the top of the head
From the back to the top of the head
Click
Attach the scalp massager. It would be better to massage once a day (for no more than five minutes).
●
Do not use on other than the scalp.
●
Use on dry hair.
●
Use only after removing hair tangles with a brush.
Make sure the airflow switch is "OFF"
before mounting the scalp massager.
Change the airflow switch to "SET"
●
The temperature is changed to "SCALP"
If the unit is hot, change temperature to
"COLD".
When the scalp massager is attached,
only "SCALP" or "COLD" can be
selected.
This massages the scalp
●
Be careful not to inadvertently press a
button when changing grip on the
handle while performing a massage.
Set the airflow switch to "OFF"
Remove the scalp massager after the
body and the scalp massager have
cooled
Take out
the power
supply plug
Finished
Do not point continuously in one direction. Please slide the scalp massager
while massaging.
Do not push heavily against the skin. Please keep a comfortable pressure.
※
Please note that overlong use of heavy massage may cause scalp pain.
During sliding from to , please take the desired point as the
center and change the massage area gradually.
Touch the hairline on the forehead with the
scalp massager, and then slide it from the
temples to the top of the head for three to five
seconds. ( )
Slide the scalp massager from the hairline
from the side to the top of the head in the
same method for three to five seconds. ( )
Slide it in the same method from the left side
to the right side.
IB-HX9KA.indd 14 2017/06/20 8:50:11