Sharp HT-SBW260, Руководство пользователя

Страница: 8 / 52

6
• Disconnect the main plug from the main socket if you want to switch the
unit off completely.
– When the unit has no input signal for over 15 minutes, it will automati-
cally switch to Standby mode.
Select Modes
Press the button on the unit repeatedly or press the LINE/USB, OPT/BT,
HDMI/ARC buttons on the remote control to select the desired mode.
Adjust the Volume
– Press the + / - buttons on the unit or on the remote control to adjust the
volume.
– If you wish to turn the sound off , press the MUTE button on the remote
control. Press the MUTE button again or press the +/- buttons on the unit
or on the remote control to resume normal listening.
Select Equaliser (EQ) Eff ect
• While playing, press the EQ button on the remote control to select
between preset equalisers: Movie (recommended for viewing movies),
Music (recommended for listening to music), News (recommended for
listening to News).
LINE IN/OPTICAL/HDMI/ARC
1. Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press the button on the unit repeatedly or press
the LINE/USB, OPT/BT, HDMI/ARC buttons on the remote control to
select the desired mode.
3. Operate your audio device directly for playback features.
4. Press the +/– button to adjust the volume to your desired level.
TIP
:
While in HDMI/ARC/OPTICAL mode, if there’s no sound output from the
unit, you may need to activate PCM signal output on your source device
(eg. TV, DVD or Blu-ray player).
Bluetooth Operation
Pair Bluetooth-enabled Devices
The fi rst time you connect your Bluetooth device to this player, you need to
pair your device to this player.
NOTE
:
– The operational range between this player and a Bluetooth device is
approximately 8 meters (without any object between the Bluetooth
device and the unit).
– Before you connect a Bluetooth device to this unit, ensure you know the
device’s capabilities.
– Compatibility with all Bluetooth devices is not guaranteed.
– Any obstacle between this unit and a Bluetooth device can reduce the
operational range.
– If the signal strength is weak, your Bluetooth receiver may disconnect,
but it will re-enter pairing mode automatically.
1. Turn on the soundbar by pressing the standby button.
2. Press the button on the unit or OPT/BT button on the remote control
to select Bluetooth mode. You are in Bluetooth mode when you see
letters BT fl ashing on the display.
3. Enter the Bluetooth search mode on the device you wish to connect to
the soundbar.
4. Select SHARP HT-SBW260 from the list.
5. Your device and the soundbar will now be connected.
–
To disconnect your device, switch off the Bluetooth connection or hold
down button on the remote control for 3 seconds.
TIPS
:
• Enter „0000“ for the password if necessary.
• The player will also be disconnected when your device is moved beyond
the operational range.
• If you want to reconnect your device to this player, place it within the
operational range.
• If the device is moved beyond the operational range, when it is brought
back, please check if the device is still connected to the player.
• If the connection is lost, follow the instructions above to pair your device
to the player again.
Listen to Music from Bluetooth Device
– If the connected Bluetooth device supports Advanced Audio Distri-
bution Profi le (A2DP), you can listen to the music stored on the device
through the soundbar‘.
– If the device also supports Audio Video Remote Control Profi le (AVRCP),
you can use the soundbar‘s remote control to play music stored on the
device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
– To pause/resume play, press the button on the remote control.
– To skip to a track, press the / buttons on the remote control.
USB Operation
1. Insert USB storage drive into the USB slot on the rear panel.
2. Press button repeatedly on the unit or LINE/USB button on the
remote control to select USB mode.
3. Unit will start playing the MP3 track automatically from the connected
USB drive.
If the MP3 playback does not start automatically, press button on the
remote control.
Troubleshooting
To keep the warranty valid, never try to repair the system yourself. If you
encounter problems when using this unit, review the following before
requesting service.
No power
Ensure that the power adaptor is properly connected to the units DC IN
socket and to the mains socket.
Ensure that there is power at the AC outlet.
Press standby button on the remote control or soundbar to turn the
soundbar on.
No sound
Increase the volume. Press Volume Up on the remote control or on the
right side of the soundbar.
Press MUTE on the remote control to ensure the soundbar is not muted.
Press source buttons to select a diff erent input source.
When using either of the Digital input, if there is no audio:
– Try setting the TV output to PCM or
– Connect directly to your Blu-ray/other source, some TVs do not pass
through digital audio.
Your TV may be set to variable audio output. Confi rm that the audio output
setting is set to FIXED or STANDARD, not VARIABLE. Consult your TV’s user
manual for more detailed information.
If using Bluetooth, ensure that the volume on your source device is turned
up and that the device is not muted.
Remote control does not work
Before you press any playback control button, fi rst select the correct
source.