E-4
SOUND BAR HOME THEATRE SYSTEM HT-SB35D
1
2
SOUND BAR HOME THEATRE SYSTEM HT-SB35D
4
3
5 6 7
9
8
1011 12 13
14
■
General
●
Keep your equipment at least 4” (10 cm) of free space
along the sides, top and back for proper ventilation.
4” (10 cm)
SOUND BAR HOME THEATRE SYSTEM HT-SB35D
4” (10 cm)
4” (10 cm)
4” (10 cm)
4” (10 cm)
4” (10 cm)
4” (10 cm)
●
Use the unit on a firm, level surface free from vibration.
●
Keep the unit away from direct sunlight, strong magnet-
ic fields, excessive dust, humidity and electronic/electri-
cal equipment (home computers, facsimiles, etc.) which
generate electrical noise.
●
Do not place anything on top of the unit.
●
Do not expose the unit to moisture, to temperatures
higher than 140°F (60°C) or to extremely low tempera-
tures.
●
If the unit does not work properly, unplug and plug it in
again. Then turn on the unit.
●
In case of an electrical storm, unplug the unit for safe-
ty.
●
Hold the AC power plug by the head when removing
it from the AC outlet, as pulling the cord can damage
internal wires.
●
The AC power plug is used as a disconnect device and
shall always remain readily operable.
●
Do not remove the outer cover, as this may result in
electric shock. Refer internal service to your local
SHARP service facility.
●
This unit should only be used within the range of 41°F
- 95°F (5°C - 35°C).
●
SHARP is not responsible for damage due to improper
use. Refer all servicing to a SHARP authorised service
center.
Warning:
●
The supplied AC/DC adaptor contains no user ser-
viceable parts. Never remove covers unless qualified to
do so. It contains dangerous voltages, always remove
mains plug from the AC outlet before any service opera-
tion or when not in use for a long period.
●
The AC/DC adaptor supplied with the HT-SB35D must
not be used with other equipment.
●
Never use an AC/DC adaptor other than the one speci-
fied. Otherwise, problem or serious hazards may be
created.
●
The voltage used must be the same as that specified on
this unit. Using a higher voltage is dangerous and may
result in a fire or other type of accident causing damage.
SHARP will not be held responsible for any damage re-
sulting from such usage.
●
In case of repairing, please bring the entire system set
to the service center.
■
Volume control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which oc-
curs while turning the unit on with the volume control setting
up high, or while continually listening at high volumes.
Precautions
Controls and indicators
1. Left Channel Speakers
2. Right Channel Speakers
3. On/Standby/Input/
Bluetooth
Pairing Indicator
4. On/Standby Button
5. Input Button
6. Pairing Button
7. Subwoofer Pairing Indicator
8. Surround Indicator
9. Surround Button
10. Volume Down Button
11. Volume Up Button
12. Audio Format Indicator
13. Remote Sensor
14. NFC detection area
■
Front Panel
