E-13
■
Pairing with other Bluetooth source device
1
Press the ON/STANDBY button to turn the power
on.
2
Press the INPUT button to select
Bluetooth
func-
tion. (INPUT indicator blinks in blue.)
3
Press and hold the PAIRING button on the remote
control for 3 seconds or more.
INPUT indicator blinks quickly. The sound bar is now
in pairing mode and is ready to be paired with other
Bluetooth
source device.
4
Perform pairing procedure on the source device
to detect this sound bar. “HT-SB35D SHARP” will
appear in the detected devices list (if available) in
the source device. (Refer the source device oper-
ating manual for details).
Notes:
●
Place the devices to be paired within 3 feet (1 me-
ter) of each other when pairing.
●
Some source devices are unable to display lists of
detected devices. To pair this sound bar with the
source device, refer to the source device operating
manual for details.
5
Select “HT-SB35D SHARP” from the source list. If
Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
6
INPUT indicator (blue) will stop blinking once the
sound bar is successfully paired with the source
device. (Pairing information is now memorized in
the sound bar.)
Some audio source devices may connect with the
sound bar automatically after pairing is completed,
otherwise follow the instructions in the source device
operating manual to start connection.
7
Press the play button on remote control or source
device to start
Bluetooth
streaming playback.
Notes:
●
If a device such as microwave oven, wireless LAN card,
Bluetooth
device or any other device that uses the same
2.4 GHz frequency is placed near the system some
sound interruption may be heard.
●
The transmission maximum distance of the wireless
signal between the device and the sound bar is about
32‘ (10 m), but may vary depending on your operating
environment. If a steel concrete or metallic wall is be-
tween the device and the sound bar, the system may
not operate at all, because the wireless signal cannot
penetrate metal.
●
If this sound bar or the source device is turned off be-
fore
Bluetooth
connection is completed, pairing will
not be completed and the pairing information will not
be memorized. Repeat step 1 onward to start pairing
again.
●
To pair with other devices, repeat steps 1 - 5 for each
device.
This sound bar can be paired to a maximum of 99 de-
vices. If subsequent device is paired, the oldest device
paired, will be deleted and replaced with the new one.
●
Once a device is ousted or deleted from the pairing list,
the pairing information for the device is also deleted. To
listen to the sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the device again.
●
HT-SB35D supports
Bluetooth
profile AVRCP 1.4. If
your device supports the same profile (refer to device
manufacturer’s specification), HT-SB35D is able to con-
trol the volume of the device.
Note:
Some music applications do not support this feature,
hence there will be no volume synchronisation between
your device and the sound bar even if your
Bluetooth
device supports such profile.
■
Listening to the sound
Check that:
●
The source device
Bluetooth
functionality is ON.
●
Pairing of this sound bar and the source device is com-
pleted.
●
Sound bar is in connected mode (INPUT indicator (blue)
lights up.)
●
Any device connected to the AUDIO IN or OPTICAL IN
jack is turned off.
1
Press the ON/STANDBY button to turn the power
on.
2
Press the INPUT button to select
Bluetooth
func-
tion.
3
Start the
Bluetooth
connection from the
Blue-
tooth
stereo audio source device.
4
Playback will start automatically, otherwise
press play (on the remote control or the source
device).
Notes:
●
For various
Bluetooth
operations, refer “NFC
connection for audio playback” on page 12.
●
If the source device has an extra bass function or
equalizer function, set them to off. If these functions
are on, sound may be distorted.
Notes:
●
Make the
Bluetooth
connection again if the source de-
vice is not turned on, or its
Bluetooth
functionality is off
or is in sleep mode.
■
To disconnect the
Bluetooth
device
Perform any of the followings.
- Disconnect the
Bluetooth
connection on the audio source
device.
Refer the operating manual supplied with the device.
- Turn off the
Bluetooth
stereo audio source device.
- Turn off this sound bar.
Note:
The volume of this sound bar may not be controlled as
intended depending on the device.
Listening to
Bluetooth
enabled devices (continued)
