background image

E-

Special notes

WARNING : TO REDUCE THE RISK OF 

FIRE  OR  ELECTRIC  SHOCK,  DO  NOT 

EXPOSE THIS APPLIANCE TO RAIN OR 

MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 
NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE 
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 
PERSONNEL.

Explanation of Graphical Symbols:

The lightning flash with arrowhead symbol, 

within an equilateral triangle, is intended to 

alert the user to the presence of uninsulated 

“dangerous  voltage”  within  the  product’s 

enclosure  that  may  be  of  sufficient 

magnitude  to  constitute  a  risk  of  electric 

shock to persons.

The exclamation point within an equilateral 

triangle  is  intended  to  alert  the  user  to 

the    presence  of  important  operating  and 

maintenance  (servicing)  instructions  in  the 

literature accompanying the appliance.

NOTE

This equipment has been tested and found 

to comply with the limits for a Class B digital 

device,  pursuant  to  Part  15  of  the  FCC 

Rules. These limits are designed to provide 

reasonable  protection  against  harmful 

interference  in  a  residential  installation. 

This  equipment  generates,  uses,  and  can 

radiate  radio  frequency  energy  and,  if  not 

installed and used in accordance with the 

instructions, may cause harmful interference 

to  radio  communications.  However,  there 

is  no  guarantee  that  interference  will  not 

occur  in  a  particular  installation.  If  this 

equipment does cause harmful interference 

to radio or television reception, which can 

be  determined  by  turning  the  equipment 

off and on, the user is encouraged to try to 

correct the interference by one or more of 

the following measures:

Reorient  or  relocate  the  receiving 

antenna.

Increase  the  separation  between  the 

equipment and receiver.

Connect  the  equipment  into  an  outlet 

on a circuit different from that to which 

the receiver is connected.

Consult  the  dealer  or  an  experienced 

radio/TV technician for help.

WARNING

FCC  Regulations  state  that  any 

unauthorized  changes  or  modifications 

to  this  equipment  not  expressly  approved 

by the manufacturer could void the user’s 

authority to operate this equipment.

FOR YOUR RECORDS

For your assistance in reporting this unit in 

case of loss or theft, please record below 

the  model  number  and  serial  number 

which are located on the rear of the unit. 

Please retain this information.

     Model number       .............................

     Serial number        .............................

     Date of purchase   .............................

     Place of purchase  .............................

Features

SRS WOW HD™ significantly improves the playback quality of audio, delivering a dynamic 3D 

entertainment experience with deep, rich bass and high frequency clarity for crisp detail.

Содержание HT-SB250

















Отзывы: