Sharp HT-SB250, Руководство по эксплуатации

Страница: 11 / 16

E-0
AC power connection
After checking all the connections have been made
correctly, connect the AC power cord to the AC
power input jack, then to the AC outlet.
Using with the AC/DC
adaptor
■
1
Plug the AC power cord into the AC/DC
adaptor.
2
Plug the AC/DC adaptor cable into the DC
INPUT jack on the unit.
3
Plug the AC power cord into an AC outlet.
Notes:
There will be no indication during power
stand-by mode unless the ON/STAND-BY
button is pressed.
Unplug the AC/DC adaptor from the AC
outlet if the unit will not be used for a
prolonged period of time.
Use only the supplied AC/DC adaptor. Using
other AC/DC adaptor may cause an electric
shock or fire.
●
●
●
RIGHT LEFT
LINE IN 1 LINE IN 2
2
1
AC/DC Adaptor
Cable
DC INPUT jack
(DC 12V)
AC power cord
AC/DC Adaptor
(AC 100 - 240 V
~ 50/60 Hz)
AC outlet
Remote control
Battery installation
■
Insert pin into the hole as shown and pull to
open the battery holder.
Remove the old battery from the battery
holder, insert the new battery and then
slide the battery holder back into the remote
control.
2
Back of
remote control
Pin
Battery type
Battery holder
Locking tab
Polarity (+) symbol
Positive (+) side up
Precautions for battery use:
Remove the battery if the unit will not be used for
a long period of time. This will prevent potential
damage due to battery leakage.
Caution:
Do not use rechargeable battery (nickel-
cadmium battery, etc.).
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent
type.
Batteries (battery pack or batteries installed)
●
●
●
●
This product contains a CR Coin Lithium Battery
which contains Perchlorate Material – special
handling may apply, California residents, see
www.dtsc.ca.gov/hazardouswaste/perchlorate/
Caution:
If this product is to be used in other than 120 V
region, please change the AC power cord to suit
the region.
The AC power cord part codes for 220 - 240 V
region are as follow :
1) QACCEA002AW00 (For Europe and Latin
America region)
2) QACCBA005AW00 (For United Kingdom
region)
3) QACCLA002AW00 (For Australia region)