GX20
2 – 73
CONFIDENTIAL
4. Press the key “Centre” to return to the initial screen with the display, “Diag Param Saving”.
5. Press the “End/Power” key to finish operation.
2. Camera Adjustment/Test
Serial Signal Format for Camera Adjustment/Test
*
1: Be sure to check white flaw (WHC command) before performing white flaw correction (WH command).
*
2: CAM5 Full output of flash is given 0.5 sec after the camera startup and then lights out.
*
3: CAM4,6 Pre-flash 0.5 sec after the camera startup.
*
4: SHT2 After full output, pre-flash also lights out.
“
”
Volume control.Turn up the volume by 1 level.
During playback of ring tone: Ring tone is changed.
During key touch tone output: Incoming audio volume is
changed.
“
”
Volume control.Turn down the volume by 1 level.
During playback of ring tone: Ring tone is changed.
During key touch tone output: Incoming audio volume is
changed.
“Centre”
End
Shifting from this mode to the initial screen.
Item
Incoming Serial Signal
Outgoing Serial Signal
Contents
Test Method
Command
n
Response
Dark current
correction
and white
flaw check.
WHC
(Including ini-
tialization)
Swwx
yyyzaaa
bbb
Recom-
mended
value:
00840
12000
0000
In the case of OK.
AAAA, BBB
AAAA: Number of white
flaws
BBB: Max. level
In the case of NG.
COUNT NG (More than
2000 white flaws)
000000: Insufficient light
shielding
S: Mode (0 to 3)
Recommended value: 0
ww: Dividing ratio (00 to 16)
Recommended value: 08
x: Average number (0 to 4)
Recommended value: 4
yyy: Thresholddetection
frequency (000 to 255)
Recommended value: 012
z: G Data mode (0 to 3) *1
Recommended value: 0
aaa: Stabilized frame number
immediately after startup
Recommended value: 000
bbb: Frame rate to be corrected
Recommended value: 000
Refer to the “Adjustment proce-
dures after replacement of parts”
on pages 2 – 36 to 2 – 38.
White flaw
correction *1
WH
(Including ini-
tialization)
None
OK
White flaw correction.Refer to the “Adjustment proce-
dures after replacement of parts”
on pages 2 – 36 to 2 – 38.
Camera ON/
OFF
CAM
6
5
4
3
2
1
0
CAMn
ON (QQVGA Macro pre-flash
[White])*3
ON (QQVGA full output [White])*2
ON (QQVGA Normal pre-flash
[White]) *3
D’ont support
ON (VGA)
ON (QQVGA)
OFF
Checking photography.
To switch to the other mode, power
off and then send the command
again.
Shutter ON/
OFF
SHT
2
1
0
SHT n
Shutter ON (Full output [White] 400
mS) *4
Shutter ON
Shutter OFF
Shutter ON/OFF operation.
When SHT 1 or 2 is transmitted,
the shutter turns ON; when SHT0
(to fix the screen) is transmitted,
the shutter is released.
Zoom
ON/OFF
ZOOM
2
1
0
ZOOM n
ZOOM ON (4 x Zoom)
ZOOM ON (2 x Zoom)
ZOOM OFF
*ZOOM only available for CAM,
CAM4, or CAM5
Changing zoom.
When ZOOM 1 is transmitted, the
double size image is displayed;
when ZOOM 2 is transmitted, the
original state is returned.
Key
Description
Contents
Содержание GX20
Страница 38: ...GX20 2 32 CONFIDENTIAL Figure 64 Contact points Figure 65 Turning power on Points Push ...
Страница 91: ...GX20 3 7 CONFIDENTIAL MEMO ...
Страница 96: ...GX20 4 5 CONFIDENTIAL MEMO ...
