Sharp GX-CD5200V, Руководство по эксплуатации

Страница: 30 / 44

04/1/28 CX-GD5200V_EN2.fm
E-29
ENGLISH
GX-CD5200V
Radio
Listening to the radio (continued)
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
●
" " will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
■
Memorising a station
You can store 40 (FM, SW-1, SW-2 and MW) stations in memory and
recall them at the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a few hours
should there be a power failure or the AC power lead disconnection.
■
To recall a memorised station
■
To scan the preset stations
The stations saved in memory can be scanned automatically.
(Preset memory scan)
■
To erase entire preset memory
FM stereo mode indicator
FM stereo receiving indicator
1
Perform steps 1 - 3 in "Tuning" on page 28.
2
Press the MEMORY button to enter the preset tuning sav-
ing mode.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory.
If the "MEMORY" and preset number indicators disappear be-
fore the station is memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorised will be erased.
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
1 Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET ( or ) button again when the desired sta-
tion is located.
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Whilst pressing down the REC PAUSE button and the CON-
TINUOUS PLAYBACK button, press the TUNER (BAND)
button until "TUNER CL" appears.