background image

 

Introduction : Open Accessory

Open Accessory support allows external USB hardware 

(an Android USB accessory) to interact with an Android-

powered device in a special accessory mode. When an 

Android-powered device is in accessory mode, the con-

nected accessory acts as the USB host (powers the bus 

and enumerates devices) and the Android-powered device 

acts in the USB accessory role. Android USB accessories 

are specifically designed to attach to Android-powered 

devices and adhere to the Open Accessory Protocol, that 

allows them to detect Android-powered devices that sup-

port accessory mode.

 

Android device connection (USB)

Insert the connector to the Android device.

Connector  

(not supplied)

Device 

(Smartphone/Tablet)

Plug in the Android device to the unit via USB 

connector.

 

Android device playback

Press the ON/STANDBY button to turn the power on.

Press the USB  /  button on the main unit or the 

remote control to select USB function.

Connect the device (Smartphone/Tablet) to the unit.

Press play (on remote control or source device).

Notes:

 

If the source device has an extra bass or equalizer 

function, set them to off. If these functions are on, 

sound may be distorted.

 

Incoming calls will pause the playback/application.

 

Once the calls are answered, the conversation can only 

be heard through the built-in speaker of the cellular 

device. Turn on the device speaker or disconnect the 

device to start conversation.

 

To disconnect the Android device

Pause the playback or quit the application (app).

Disconnect the device from the USB terminal.

 

Various functions

Function Remote control

Operation

Track 

up/down

Press in the playback or 

stop mode.

If you press the button 

in the stop mode, press 

the  /  button to start the 

desired track.

Fast 

forward/

reverse

Press and hold down in 

the playback mode.

Release the button to 

resume playback.

Notes:

 

If non-compatible device is detected “NOT SUPT” will 

be displayed.

 

Controls (play/pause/track up/track down) will function 

based on actual application (app) controls used on 

Android devices.

 

Stop button ( ) is invalid during Android device 

playback.

Android is a trademark of Google Inc.

Listening on Android™ devices

E-14

Содержание GX-BT9























Отзывы: