Sharp GX-BT9, Руководство по эксплуатации

Страница: 11 / 22

■
About NFC technology
Near Field Communication (NFC) is a set of standards for
devices (smartphones/tablets) to establish radio communi-
cation with each other by touching/tapping them together
or bringing them into close proximity.
Using NFC in this product simplifies the pairing method of
Bluetooth connectivity.
Notes for Android Device.
●
This audio system supports NFC-enabled device with
Android 4.1, Jelly Bean and higher.
●
For device with a lower Android version, refer the
operation manual of the device for recommended app
(application).
Unlike other wireless technology, NFC requires no
discovery or pairing.
Simply tap the source device to the NFC detection area
to instantly enjoy seamless connectivity between your
smart device and the audio system.
■
NFC detection area
NFC detection area location may vary depending on the
device (smartphone/tablet). Refer operation manual of the
device for detail.
PORTABLE MUSIC BOOMBOX GX-BT9
REMOTE SENSOR
PORTABLE MUSIC BOOMBOX GX-BT9
REMOTE
SENSOR
NFC detection
area area on the
main unit
Manual
Bluetooth
setting
Switch ‘ON’
Bluetooth
Search/scan
A Bluetooth audio
source device
(smartphone/tablet).
Pairing
Connect
■
NFC connection for audio playback
Check that:
●
Your device (smartphone/tablet) has an NFC function.
●
NFC function on your device is enabled.
●
Screen lock function of the device is off.
●
This unit is not in low power consumption (ECO)
mode.
●
Your device must be within 10 meters from the unit.
1
Touch your device to the NFC detection area on the
main unit.
PORTABLE MUSIC BOOMBOX GX-BT9
REMOTE
SENSOR
NFC detection area
on the main unit
2
A pop-up window asking whether to proceed with the
Bluetooth connection appears on the device. Select
<YES>.
●
The ‘connected’ message appears when the connection
is complete.
3
Press play (on remote control or source device).
●
Sound will be heard from the speakers of this unit via audio
streaming.
●
Your device must be within 10 meters from the unit.
Various Bluetooth operation buttons (remote control only)
Press the button to play or pause.
Press the button to track up.
Press and hold to fast forward.
Press the button to track down.
Press and hold to fast reverse.
Notes:
●
To disconnect, simply touch your device to the NFC
detection area on the main unit again.
●
This product switches to Bluetooth function automati-
cally when NFC tagging is done by your device.
●
If your device does not support NFC, or if you wish to
listen to audio via Bluetooth connectivity without NFC;
refer “ Pairing with other Bluetooth source devices ”
on the next page.
●
Some Bluetooth devices will connect to this product
automatically when the device or its Bluetooth mode
was turned on. In such case, it will also change the
function selection of this product. If you do not want
it to connect automatically, please disable Bluetooth
on your device.
●
It takes about 6-8 seconds for a Bluetooth enabled
device (eg. smartphone) to establish Bluetooth con-
nection with this unit via NFC or manual connection.
●
If “Empty tag” or similar message appears on your de-
vice, touch the device again to the NFC detection area
on the main unit.
Bluetooth one touch connection via NFC
E-11