Sharp FU-28H-A, Руководство по установке

Страница: 18 / 36

TROUBLESHOOTING
Before calling for repair, please review the list below, since the problem may not be a unit malfunction.
SYMPTOM REMEDY (not a malfunction)
The Remote Control does not
work
• Have the batteries been depleted?
• Are the batteries inserted correctly?
• Is a fluorescent lighting in the room flickering due to serv-
ice life? (Refer to E-5)
Odours and smoke are not re-
moved
• Replace the filters if they appear to be heavily soiled.
(Refer to E-14)
A ticking sound is heard from
the unit
• Ticking sound is emitted when the unit is generating ions.
This is normal and not a malfunction.
The discharged air has an
aroma or odour.
• Check to see if the filters are heavily soiled.
Replace filters (Refer to E-14)
• Plasmacluster Air Purifiers emit small traces of ozone
which may produce an odour. These ozone emissions
are below safety levels set by the IEC 60335-2-65.
• Is the unit installed in a location that is difficult for the
sensor to detect cigarette smoke?
• Are the odour sensor openings blocked or clogged?
(In this case, clean the openings.) (Refer to E-15)
The unit does not operate when
cigarette smoke is in the air.
E-16
ERROR DISPLAY
LAMP INDICATION REMEDY
The “Silent” Fan Speed Indi-
cator Light blinks.
Fan motor disconnected or abnormal.
Operation stops.
• Pressing the ON/OFF button will reset the error display,
but if error occurs again, contact the shop where you
purchased the unit.
OPTIONAL STAND
Model : FZ-FC1TS
Please ask for optional stand at your dealer .
In case you prefer free standing installation,
optional stand FZ-FC1TS is available.