9
1
(with the main unit OFF)
2
3
LIGHT CONTROL
You can set the Cleanliness Monitor / Plasmacluster Ion Light to OFF when they are lighting up.
ADJUSTMENT OF SENSOR DETECTION SENSITIVITY
PLASMACLUSTER ION ON/OFF
When Plasmacluster Ion is ON, the Plasmacluster Ion Light will turn on. (blue)
ON
OFF
more than 3 sec.
more than 3 sec.
(with the main unit ON)
• When the main unit starts operation,
the operation starts in the previous
mode it was operated in.
NOTE
• If the CLEAN ION SHOWER Button is not
pushed within 8 seconds, the setting will be
saved automatically.
• When the main unit starts operation, the
operation starts in the previous mode it was
operated in.
NOTE
1
(with the main unit ON)
2
more than 3 sec.
AUTO
DIM
OFF
AUTO
Light automatically switches ON or OFF based on
room brightness.
Room is bright: light is ON
Room is dark: light is OFF
OFF
When set to “OFF”, the “DIM” light illuminates for
8 seconds after operation starts and then the light
turns off.
more than 3 sec.
Dust sensor / Odor sensor
• If the power OFF Button is not pushed within 8 seconds of adjusting sensor
sensitivity, the setting will be saved automatically.
• The sensor sensitivity setting will be saved even if the main unit is unplugged.
NOTE
You can change the sensitivity of the Dust sensor / Odor sensor and the Light sensor .
Light sensor
Standard
4h
8h
2h
High
Low
Standard
High
Low
FP-J50J_2nd.indd 9
FP-J50J_2nd.indd 9
2022/04/22 11:01:44
2022/04/22 11:01:44