Sharp FO-P600, Руководство по эксплуатации

Страница: 43 / 162

Optional Reception Settings
42
2
If you hear a soft fax tone, wait until your fax responds (the extension
phone will go dead), then hang up.
3
If the fax doesn't respond, or if the other party first talks to you and then
wants to send a fax, press once and twice on the extension
phone (only on a tone dial phone). This signals the fax to begin
reception. Hang up.
•
The above step is necessary if you have set the Fax Signal Receive setting
(see below) to NO.
•
Your fax will not accept the signal to begin reception (5
**
) if a document is
loaded in its feeder.
5
Phone goes dead
Beep
Optional Reception Settings
Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after
answering a call on your fax or an extension phone. If you use a computer fax
modem to send documents on the same line, you must turn this function off in
order to prevent your fax from mistakenly attempting to receive documents
from the computer fax modem. Follow the steps below to change the setting.
1
Press once and once.
2
Press once and 5 times.
FUNCTION
Display:
OPTION SETTING
FAX SIGNAL RX
all.book Page 42 Monday, October 1, 2001 10:01 AM