Sharp FO-CC500, Руководство по обслуживанию

Страница: 21 / 162

FO-CC500A
FO-K01A
5.3.4 Panel key test mode
1
After going into the mode, cordless handset is waiting for a key to be pressed.
2
All keys should been pressed except for off key.
3
• After pressing all keys, off key should been pressed. If any keys that are not pressed exist, it will be displayed on LCD.
• Press the NG keys. If another NG keys exists, it will also be displayed.
• If all keys are pressed, cordless handset will going to stand-by state.
* If you want to cancel the Panel Test, press the and # key simultaneously.
2 – 8
5.3.5 LED test mode
1
After going into the mode, backlight is switched on.
2
By inputting off key, it goes to stand-by state of Production mode.
OFF
0 4
1 1 1 1 1
Mode No.
Input key
2 2 2 2 2
Press all keys
3 3 3 3 3
End of mode
Input key
OFF
1 1
1 1 1
Mode No.
2 2
2 2 2
End of mode
Input key Input key
0 5
5.3.6 LCD test mode
1
After going into the mode, check patterns are displayed on the LCD.
2
By inputting off key, it goes to stand-by state of Production mode.
OFF
1 1 1 1 1
Mode No.
2 2 2 2 2
End of mode
Input key Input key
0 6
5.3.7 SX test mode
1
After going into the mode, sidetone root is enabled.
2
Receiver volume is selected by using Up/Down keys. (3levels)
3
By inputting off key, it goes to stand-by state of Production mode.
UP Volume Up OFF
DOWN Volume Down
1 1
1 1
1
Mode No.
2 2
2 2
2
Volume change
3 3
3 3
3
End of mode
Input key Input key Input key
0 7
5.3.8 Battery test mode
1
After going into the mode, cordless handset will check the Battery level.
• If it is less than 3.4V, “LOW BATT” will be displayed. ................. The input from the battery is turned off to create the “LOW BATT” state.
Maintain this mode.
• If it is more than 3.3V, “BATT OK” will be displayed.
• If cordless handset is put on the cordless handset charger, “Cradle Power” will be displayed.
2
By inputting off key, it goes to stand-by state of Production mode.
OFF
1 1 1 1 1
Mode No.
2 2 2 2 2
End of mode
Input key Input key
0 8