Sharp FO-CC500, Руководство по обслуживанию

Страница: 112 / 162

FO-CC500A
FO-K01A
8 – 7
Table 2. FO-CC500 Program loader BOX connection procedures (FAX PWB Rewriting)
FAX PWB rewriting
1
Before connecting the PC
and Program loader BOX
with RS-232C cable.
Set the switches of Program
loader BOX as follows.
(a) MAIN SW OFF (down)
(b) CALIBRATION OFF (down)
(c) BAT SW OFF (down)
(d) PARK SW OFF (down)
(e) IC Voltage to 3.3V (down)
(f) MODE to DOWNLOAD (down)
2
After connecting the PC
and Program loader BOX
with RS-232C cable. (1*)
Set the switch of Program
loader BOX as follows.
(g) MAIN SW ON (up)
3
Power supply to the FAX
machine.
Plug the AC power cord of the
FAX machine to the outlet.
(2*)
4
Connect Program loader
BOX and the Control
PWB of the FAX machine
(CNPRG) with FO-CC500
Main cable. (3*)
---
1*: Connect one end of RS-232C cable to the COM port of the PC and the other end to RS-232C DSUB 9PIN of
FO-CC500 Program loader BOX.
2*: Press and hold down the keys 1 and 3 simultaneously while turning on the FAX machine and until “DOWNLOAD
MODE” appears.
3*: Perform the procedure
3
before
4
. (Turn on the Program loader BOX and the FAX machine before connecting
FO-CC500 Main cable and the FAX machine.)
Connect one end of FO-CC500 Main cable to the connector of the control PWB connector for the FAX machine
(CNPRG) (refer to Fig. 3), and the other end to CN1 of FO-CC500 Program loader BOX.
Set the switches of Program
loader BOX as follows.
(a) MAIN SW OFF (down)
(b) CALIBRATION OFF (down)
(c) BAT SW OFF (down)
(d) PARK SW OFF (down)
(e) IC Voltage to 3.3V (down)
(f) MODE to DOWNLOAD (down)
Cordless Handset
DSS PWB (Cordless
Handset PWB)
1
Before connecting the PC
and Program loader BOX
with RS-232C cable.
2
After connecting the PC
and Program loader BOX
with RS-232C cable. (1*)
Set the switch of Program
loader BOX as follows.
(g) MAIN SW ON (up)
3
Connecting Program
loader BOX and DSS PWB
with FO-CC500 RF cable
or FO-CC500 RM cable.
(2*)
---
4
When supplying power to
DSS PWB.
Set the switch of Program
loader BOX as follows.
(h) BAT SW to ON (up)
Table 3. FO-CC500 Program loader BOX connection procedures (DSS PWB Rewriting)
Set the switches of Program
loader BOX as follows.
(a) MAIN SW OFF (down)
(b) CALIBRATION OFF (down)
(c) BAT SW OFF (down)
(d) PARK SW OFF (down)
(e) IC Voltage to 3.3V (down)
(f) MODE to DOWNLOAD (down) Set the switch of Program
loader BOX as follows.
(g) MAIN SW ON (up) --- Connect the AC power cord
cable of the FAX machine to
the socket. (3*)
FAX machine DSS
PWB (built into FAX
machine) (Cordless
PWB)
Set the switches of Program
loader BOX as follows.
(a) MAIN SW OFF (down)
(b) CALIBRATION OFF (down)
(c) BAT SW OFF (down)
(d) PARK SW OFF (down)
(e) IC Voltage to 3.3V (down)
(f) MODE to DOWNLOAD (down) Set the switch of Program
loader BOX as follows.
(g) MAIN SW ON (up) --- Set the switch of Program
loader BOX as follows.
(h) PARK SW to ON (up)
FAX machine DSS
PWB (Unit)
(Cordless PWB)
1*: Connect one end of RS-232C cable to the COM port of the PC and the other end to RS-232C DSUB 9PIN of
FO-CC500 Program loader BOX.
2*: Each one end of FO-CC500 RF cable and FO-CC500 RM cable is connected to the connector of the DSS PWB (refer
to Figs. 4, 5 and 6) and the other end to the CN1 of the Program loader BOX.
3*: Press and hold down the keys 1 and 3 simultaneously while turning on the FAX machine and until “DOWNLOAD
MODE” appears.