Sharp FO-B1600 Скачать руководство пользователя страница 68

Страница: 68 / 114

5. Answering Machine Connection

Connecting an Answering Machine

If desired, you can connect an answering machine to your fax machine's

TEL.

SET

socket This will allow you to receive both voice messages and faxes

when you are out.

♦

Important:

If the answering machine is not connected to the

TEL. SET

socket on the fax as shown, the setup will not operate properly.

Remove the seal covering the TEL.
SET socket.

Connect the answering machine's telephone line socket to the TEL. SET
socket.

•

If desired, you can connect an extension phone to your answering
machine's extension phone socket.

Note:

When FaxAbility or Fax Duet (distinctive ring) is used, the answering

machine may be connected to any extension of the same line.

TEL.LINE

TEL.SET

TEL.SET

TEL.LINE

To answering machine's
telephone line socket.

Important:

In New Zealand, not all standard telephones and answering machines will

respond to incoming ringing when connected to the extension socket of the equipment.

all.book

Page 66

Thursday, March 6, 2003

3:57 PM

Содержание FO-B1600



















































































































Результаты поиска

Содержание FO-B1600

Отзывы:

Sharp FO-B1600, Руководство по эксплуатации, Страница: 68 / 114

Результаты поиска

Содержание FO-B1600

Отзывы: