Sharp FO-B1600 Скачать руководство пользователя

Страница: 102 / 114

Problems and Solutions

100

A distorted image is
received at the other end.

• Noise on the telephone line may cause distortion. Try

sending the document again.

• ECM mode (see page 48) will help prevent distortions

due to line noise. Note that ECM mode must be
turned on in the other machine as well.

• Make a copy of the document on your fax machine. If

the copy is also distorted, your fax machine may need
service.

Reception and copying problems

Problem

Solution

The printing paper comes
out blank when you try to
receive a document.

• Make sure that the document is loaded properly in the

feeder of the transmitting machine. Make a copy or
print a report to confirm the printing ability of your
machine.

Print quality is poor.

• The print cartridge may need alignment or cleaning.

See page 93.

The received document is
faint.

• Ask the other party to send higher contrast

documents. If the contrast is still too low, your fax
machine may need service. Make a copy or print a
report to check your machine’s printing ability.

• The print cartridge may need replacement.

Received images are
distorted.

• Noise on the telephone line may cause distortion.

Have the other party try sending the document again.

• ECM mode (see page 48) will help prevent distortions

due to line noise. Note that ECM mode must be
turned on in the other machine as well.

• Make a copy or print a report on your fax machine. If

the copy or report is also distorted, your fax machine
may need service.

all.book

Page 100

Thursday, March 6, 2003

3:57 PM

Содержание FO-B1600



















































































































Результаты поиска

Содержание FO-B1600

Отзывы:

Похожие инструкции для FO-B1600

Бренды по названию

Популярные бренды

Sharp FO-B1600, Руководство по эксплуатации

Результаты поиска

Содержание FO-B1600

Отзывы:

Похожие инструкции для FO-B1600

Бренды по названию

Популярные бренды