1 – 9
UX-300U
FO-760U
[5] Quick reference guide
INSTALLATION
1. Connect the handset as shown.
2. Plug the power cord into a grounded, 120 V outlet.
3. Plug one end of the telephone line into the "TEL. LINE" jack on the rear of the
fax, and the other end into your telephone wall jack.
CONNECTING AN ANSWERING MACHINE AND/OR EXTENSION TELEPHONE
SETTING THE DATE AND TIME
Note: Imaging film and paper must be loaded to perform the following operation.
Press:
Display shows: DATE & TIME SET
Press the START key:
Enter two digits for the Month (01 through 12).
Enter two digits for the Day (01 through 31).
Enter four digits for the Year (Ex: 1999).
Enter two digits for the Hour (01 through 12).
Enter two digits for the Minute (00 through 59).
Press the key for A.M. or the # key for P.M.
When finished, press:
STORING AND CLEARING NUMBERS FOR AUTOMATIC DIALING
Note: Imaging film and paper must be loaded to perform the following operation.
1. Press:
Display shows: FAX/TEL # MODE
2. Press 1 to store a number or 2 to clear a number.
3. Enter a 2-digit Speed Dial number (from 01 to 05 for Rapid Key Dialing, or 06
to 45 for Speed Dialing). (If you are clearing a number, go to Step 7.)
4. Enter the full telephone/fax number.
5. Press:
6. Enter the name of the location by pressing number keys (max. of 20 charac-
ters). (Refer to the letter entry table in
ENTERING YOUR NAME AND
NUMBER.)
7. Press:
Place your document (up to 10 pages)
face down in the document feeder.
Normal Dialing
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person answers, ask them to press their Start
key).
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key. Transmission will begin automatically.
Speed Dialing
1. Press:
2. Enter 2-digit Speed Dial number.
3. Press:
RECEIVING DOCUMENTS
Press:
FAX mode: The fax automatically answers on four rings and receives the incoming
document.
TEL mode:
A.M. mode: Select this mode when an answering machine is connected to the fax
and the answering machine is turned on.
TEL.
SET
TEL.
LINE
1
3
2
TEL.
SET
TEL.
LINE
1. Remove the seal covering the "TEL. SET" jack on the rear of the fax. Connect
an extension telephone or answering machine to the "TEL. SET" jack.
2. If desired, connect an extension phone to the answering machine.
ENTERING YOUR NAME AND NUMBER
Note: Imaging film and paper must be loaded to perform the following operation.
1. Press:
FUNCTION
3
Display shows: OWN NUMBER SET
2. Press:
3. Enter your fax number (max. of 20 digits) by pressing the number keys.
♦
If you make a mistake, press the HOLD/SEARCH key to move the cursor
back to the mistake, then enter the correct number or letter.
4. Press:
5. Enter your name by pressing the appropriate number keys as shown below.
♦
To enter two letters in succession that require the same key, press the SPEAKER
key after entering the first letter.
6. When finished, press:
START/MEMORY
A =
B =
C =
D =
E =
F =
G =
H =
I =
J =
K =
L =
M =
N =
O =
P =
Q =
R =
S =
T =
U =
V =
W =
X =
Y =
Z =
SPACE =
REDIAL
HOLD/
SEARCH
SPEAKER
1
2
3
4
5
6
7
8
9
0
GHI
JKL
MNO
TUV
WXYZ
PQRS
SPEED
DIAL
ABC
DEF
Deletes high-
lighted letter
Upper/lower
case shift key
Moves cursor
to the left
Moves cursor
to the right
Press either key one or more times to select
and enter a symbol.
START/MEMORY
STOP
FUNCTION
3
FUNCTION
3
SENDING DOCUMENTS
SPEAKER
SPEED DIAL
FAX
TEL
A.M.
FAX
TEL
A.M.
FAX
TEL
A.M.
FEB 1 10:30
FEB 1 10:30
FEB 1 10:30
RECEPTION
MODE
Fax
tone
RECEIVING
START/MEMORY
START/MEMORY
START/MEMORY
START/MEMORY
STOP
START/MEMORY
START/MEMORY
STOP
START/MEMORY
START/MEMORY
