1 – 6
UX-300U
FO-760U
3. Assembly and connections
1
Plug the power cord into a 120 V, 60 Hz, grounded (3-prong) AC
outlet.
•
Caution: Do not plug the power cord into any other kind of outlet.
This will damage the machine and is not covered under the
warranty.
•
The machine does not have a power on/off switch, so the power
is turned on and off by simply plugging in or unplugging the power
cord.
2
Connect the handset as shown and place it on the handset rest.
♦
The ends of the handset cord are identical, so they will go into
either jack.
3
Insert one end of the telephone line cord into the "TEL.LINE" jack.
Insert the other end into a standard (RJ11C) single-line telephone
wall jack.
Be sure to insert the telephone line cord into the "TEL.LINE" jack.
Do not Insert into the "TEL.SET" jack.
5
Attach the original document support.
Note: The original document support has a top side and a bottom
side. If you cannot insert the tabs on the support into the holes,
turn the support over.
Make sure the handset cord
goes into the jack marked
with a handset symbol on the
side of the machine!
Use the handset to make ordinary
phone calls, or to transmit and receive
documents manually.
TEL.
SET TEL.
LINE
4
Attach the paper tray extension.
♦
Pull the paper release plate forward. Insert the paper tray extension
horizontally into the notches in the paper tray. Rotate the paper
tray extension up until it snaps into place.
4. Loading printing paper
You can load letter or legal size paper in the paper tray. The maximum
number of sheets depends on the weight and size of the paper you are
loading.
♦
Paper from 16 to 20 lbs. (60 to 75 g/m
2
):
Letter size: 60 sheets Legal size: 30 sheets
♦
Paper from 20 to 24 lbs. (75 to 90 g/m
2
):
Letter size: 50 sheets Legal size: 25 sheets
1
Fan the paper, and then tap the edge against a flat surface to even
the stack.
2
Pull the paper release plate toward you.
