1 – 1
FO-71TH/UX-61TH/GQ-56TH/FO-51TH
UX-41TH/GQ-31TH/UX-21TH/FO-11TH/GQ-11TH
CHAPTER 1. GENERAL DESCRIPTION
[1] Specifications
Automatic dialing:
Rapid Key Dialing: 5 numbers
Speed Dialing: 35 numbers
Fax paper:
Initial starter roll (included with machine):
10 m
Recommended replacement roll:
FO-20PR 30m (12.7mm core)
Paper cutting method:
FO-51/11 UX-41/21 GQ-31/11:
Tear off by hand
FO-71/UX-61/GQ-56: Automatic cutter
Memory size*:
448 KB (approx. 17 average pages)
(FO-71/51 UX-61/41
GQ-56/31 Only)
Modem speed:
9,600 bps with automatic fallback to lower
speeds
Transmission time*:
Approx. 15 seconds
Resolution:
Horizontal: 8 dots/mm
Vertical:
Standard: 3.85 lines/mm
Fine/Halftone: 7.7 lines/mm
Super fine: 15.4 lines/mm
Automatic document feeder: 5 pages max. (A4, 80 g/m
2
paper)
Recording system:
Thermal recording
Halftone (grayscale):
64 levels
Compression scheme:
MR, MH, H2
Display:
16-digit LCD display
Applicable telephone line:
Public switched telephone network
Compatibility:
ITU-T (CCITT) G3 mode
Input document size:
Automatic feeding:
Width: 148 to 210 mm
Length: 140 to 297 mm
Manual feeding:
Width: 148 to 210 mm
Length: 140 to 600 mm
Effective scanning width:
210 mm max.
Effective printing width:
210 mm max.
Contrast control:
Automatic/Dark selectable
Reception modes:
TEL/FAX, TEL, FAX, A.M. (Note: A.M.
mode is for connecting an answering
machine)
Copy function:
Yes
Telephone function:
Yes (cannot be used if power fails)
Power requirements:
220-240 V AC, 50/60 Hz
Operating temperature:
5 - 35
°
C
Humidity:
30 - 85 % RH
Power consumption:
Stand-by: 4.0 W
Maximum: 115 W
Dimensions:
Width: 304 mm
Depth: 236 mm
Height: 122 mm
Weight:
Approx. 2.6 kg
*
Based on Sharp Standard No.1 Chart at standard resolution is Sharp
special mode, excluding time for protocol signals (i.e., ITU-T phase
C time only).
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for procduct
improvement without prior notice. The performance specifications figures indicated are nominal values of production units. There may be some
deviation from these values in individual units.
