Optional Settings
146
Setting 22:
Not used.
Setting 23: QUICK ON-LINE
When you transmit a multi-page document, this setting determines
whether the fax machine will dial the receiving party and begin
transmitting while scanning is still in progress, or wait until all pages
have been scanned before dialling. Press
1
to have the fax machine
dial and begin transmission while scanning is still in progress, or
2
to
have the fax machine wait until all pages have been scanned.
♦
Initial setting: 1
Setting 24: MULTI TTI
If you are using Department Control, you can press
1
to have the
department name (the name associated with the department code
entered by an operator to access the fax) appear at the top of each
transmitted document. This will appear in place of the name entered
in
Entering Your Name and Fax Number
in Chapter 1. Press
2
to turn
Multi TTI off (the sender’s name entered in Chapter 1 will appear).
♦
Initial setting: 2
Setting 25: BEEP LENGTH
This sets the duration of the beep that signals the end of transmission,
reception, or copying. Press
1
for 3 seconds,
2
for 1 second, or
3
for
no beep.
♦
Initial setting: 1
Setting 26:
Not used.
Setting 27: DEPARTMENT CODE DIGITS
This setting allows you to change the number of digits used for
Department Codes. Enter any number from
3
to
9
.
♦
Initial setting: 4
Setting 28:
Not used.
all-FO5650.book Page 146 Friday, November 26, 1999 11:05 AM
