Sharp FO-2080 Скачать руководство пользователя страница 196 | Manualshive

Страница: 196 / 257

Sharp FO-2080 Скачать руководство пользователя страница 196

90

ABOUT SUPPLIES AND OPTIONS

When ordering supplies, please use the correct part numbers as listed below.

Supply list

* Based on copying onto letter-type paper at 5% toned area

(The life of the TD cartridge which has been included in the machine at the factory
is approximately 2,000 sheets.)

Interface cable

Please purchase the appropriate cable for your computer.

USB interface cable

USB cable that supports USB 2.0.

LAN interface cable

Shielded type cable.

Be sure to use only genuine SHARP parts and supplies.

For best copying results, be sure to use only SHARP Genuine Supplies
which are designed, engineered, and tested to maximize the life and
performance of SHARP copiers. Look for the Genuine Supplies label on
the toner package.

Supply

Part number

Usable life

TD (Toner/Developer)
cartridge

FO-55ND

Approx. 6,000 sheets

Drum cartridge

FO-55DR

Approx. 18,000 sheets

Note

!FO-2080.book 90 ページ２００９年５月１５日　金曜日　午前１０時４２分

«
...
194
195
196
197
198
...
»

Содержание FO-2080


































































































































































































































































Отзывы:

Нет отзывов