manualshive.com logo in svg

Sharp ER-A411, Подробное инструкционное руководство

Поделиться
Скачать
Sharp ER-A411 Скачать руководство пользователя страница 61

61

 

■

Bill printing

This function is used for issuing the bill to the guest. Your register can print the bill on the receipt printer.

Procedure

G.C.

RCPT

NOTE

• This function is available immediately after the 

fi

 nalization of transaction.

• If the copy function is allowed, you can print the bill copy on receipt only once. If you want to 

disable the bill copy, contact your authorized SHARP dealer.

Example

Key operation

Print

K

 

■

Transferring guest checks out or in (Transfer-in/out)

NOTE

To use this function, consult your authorized SHARP dealer.

Transferring guest checks out

At the end of a clerk shift or whenever a clerk is relieved, one or more open guest checks can be transferred 
from the clerk to the open check 

fi

 le until the responsibility for the check(s) is assigned to another clerk. Also, 

all open guest checks of this clerk can be transferred at one time.

Procedure

G

GLU code

For the next guest check

When all open GLU codes of
the active clerk are transferred.

Example

Key operation

Print

501 

G

Содержание ER-A411



































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды