Sharp ER-A411 Скачать руководство пользователя страница 147

Страница: 147 / 226

147

■

Credit key (Credit1 through Credit9)

Procedure

Program each item as follows:

Select a pertinent credit key from
the credit keys list.

▼

The screen continues.

• TEXT (Use the character entry)

Description for the credit key. Up to 12 characters can be
entered.

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99

• BILL PRINT (Use the selective entry)

COMPULSORY:

Compulsory bill printing

NON-COMPUL.: Non-compulsory bill printing

• FOOTER PRINT (Use the selective entry)

This item decides whether or not your register should print a message at the foot of a receipt when a
speci

ed credit key is used.

YES: Enables footer printing on the receipt.
NO:

Disables footer printing on the receipt.

• AMOUNT ENTRY (Use the selective entry)

COMPULSORY:

Makes amount tendered entry compulsory.

INHIBITED:

Inhibits amount tendered entry.

• NON-ADD# (Use the selective entry)

COMPULSORY:

Compulsory non-add code entry

NON-COMPUL.: Non-compulsory non-add code entry

• EFT (Use the selective entry)*

COMPULSORY:

Makes EFT function compulsory.

NON-COMPUL.: Makes EFT function non-compulsory.

• DRAWER OPEN (Use the selective entry)

YES: Opens the drawer.
NO:

Disables the drawer opening.

• CHANGE DUE (Use the selective entry)

DISABLE: Disables change calculation.
ENABLE: Enables change calculation.

* For details on the use of this device, consult your authorized SHARP dealer.

Содержание ER-A411



































































































































































































































Результаты поиска

Содержание ER-A411

Отзывы:

Sharp ER-A411, Подробное инструкционное руководство, Страница: 147 / 226

Результаты поиска

Содержание ER-A411

Отзывы: