Sharp Elite PRO-60X5FD Скачать руководство пользователя

Страница: 39 / 96

V-Chip

V-CHIP is an electronic ﬁ ltering device built into your
TV. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows
parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It
does so automatically once you activate the V-CHIP
feature in your TV. "V-Chip" and "Status" will not be
selectable from the menu if you do not ﬁ rst conﬁ gure
your secret number.

•

The U.S. has two rating systems for viewing content: TV
Parental Guidelines and movie ratings.

•

The TV Parental Guidelines work in conjunction with the
V-CHIP to help parents screen out inappropriate television
shows from their children.

•

Movie ratings are used for original movies rated by the
Motion Picture Association of America (MPAA) as watched
on cable TV and not edited for television. The V-CHIP can
also be set to block MPAA-rated movies.

•

The setting automatically enters "Block" for any ratings
below your selection.

•

If Status is not set to "On", the conﬁ guration settings will
not work.

■

MPAA (Voluntary movie rating system)

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

PG-13

NC-17

NONE

Press

to adjust the item to your desired position.

" " indicates the item is blocked. Press

to exit.

General audiences. All ages admitted.

PG:

Parental guidance suggested. Some material may not be

suitable for children.

PG-13:

Parents strongly cautioned. Some material may be

inappropriate for children under 13.

Restricted. Under 17 requires accompanying parent or

adult guardian (age varies in some jurisdictions).

NC-17:

No one 17 and under admitted.

X is an older rating that is uniﬁ ed with NC-17 but may be

encoded in the data of older movies.

•

Voluntary movie rating system only uses an age-based
rating.

■

TV Parental Guidelines

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

TV-G

TV-PG

TV-14

TV-MA

NONE

TV-Y7

TV-Y

Press

to adjust the item to your desired position.

" " indicates the item is blocked. Press

to exit.

Suggested age

TV-Y:

All children.

TV-Y7:

Directed to older children.

TV-G:

General audience.

TV-PG:

Parental Guidance suggested.

TV-14:

Parents strongly cautioned.

TV-MA:

Mature audience only.

Example

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

TV-G

TV-PG

TV-14

TV-MA

NONE

TV-Y7

TV-Y

When setting an individual content-based rating item:

Press

ENTER

to access blocked content

items from the currently selected age-based rating
item.

Press

to select an individual item, and then

press

ENTER

to unblock it (" " is removed). Repeat

the same steps for the other items.

Press

RETURN

to register after all individual

content rating items are set.

Content

FV:

Fantasy violence.

Violence.

Sexual situation.

Adult language.

Sexually suggestive dialog.

Rating

Content

Suggested
age

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

: The content rating can be set, but this rating is not

normally broadcast by TV stations.

: Content rating can be set.

On-Screen Display Menu

PRO-70̲60X5FD̲E.indb 37

2011/07/01 16:38:25

Содержание Elite PRO-60X5FD

































































































Результаты поиска

Содержание Elite PRO-60X5FD

Отзывы:

Похожие инструкции для Elite PRO-60X5FD

Бренды по названию

Популярные бренды

Sharp Elite PRO-60X5FD, Руководство по эксплуатации

Результаты поиска

Содержание Elite PRO-60X5FD

Отзывы:

Похожие инструкции для Elite PRO-60X5FD

Бренды по названию

Популярные бренды