Sharp EC-SA86B, Инструкция по эксплуатации

Страница: 19 / 24

8
MAINTENANCE
Cleaning and Replacing Parts
Attention: It is recommended to clean the dust cup after each use; when the dust cup is full
or the HEPA fi lter is clogged, it needs to be cleaned and replaced if necessary.
Floorhead brushroll might be entangled with hair after long time use, it needs to be
cleaned in time to keep the vacuum working more effi ciently.
Cleaning Dust Cup and Filtration System
Clean dust cup
Press the dust cup release button. Rotate in the direction of the arrow and remove the dust cup.
Release button of the dust cup
Turn up the dust cup handle and hold it, draw out cyclone assembly in the direction of the arrow,
then dump dust from dust cup.
Clean fi lter assembly
Hold the HEPA fi lter handle and rotate it in the direction shown on the picture. Take out the HEPA fi lter;
Rotate the Grade 1 cyclone assembly in the direction shown on the picture and take it out
downwards.
Then you can clean and wash HEPA fi lter, foam fi lter, cyclones, Grade 2 cyclones, Grade 2 dust
bucket and sealing ring of Grade 2 dust bucket.
HEPA fi lter
Cyclones
Grade 2 dust bucket
Foam fi lter
Grade 2 cyclones
Sealing ring of Grade 2 dust bucket
Grade 1 cyclone assembly