![Sharp DW-E16FA Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/sharp/dw-e16fa/dw-e16fa_operation-manual_367687007.webp)
E - 12
E - 13
220V power
Rear panel
3
2
1
4
Install the rear
panel
1
Insert the tab on the lower side
2
Press the upper side
3
Press the center
●
There might be some water left in the water tank from the factory product inspection.
This is not a malfunction.
●
Install the filter before inserting the power plug into the socket.
Active Carbon Deodorizing filter
HEPA filter
HEPA filter
Tag
Active Carbon Deodorizing filter
Active Carbon Deodorizing filter
Tag
WHEN USING FOR THE FIRST TIME
HEPA filter
Click
Lower tab (3 places)
2
Press
3
Press
1
Insert
Only moves
transversely.
Handle (both sides)
INSTALLATION LOCATION
WHEN MOVING
Upper 50cm
or more
Front 50cm
or more
Rear 20cm
or more
Sides 20cm
or more
Operate it in a room at a temperature
from 3°C to 38°C.
●
Thick carpet or futon is a very
unstable place.
Avoid places with direct sunlight.
Level, stable place
Hold the handle
to move
1
2
Caster
NOTE
BEFORE USE
Remove the
rear panel and
then the filters
Install the HEPA
filter first and then
the Active Carbon
Deodorizing filter
Stop the operation,
open the drain
outlet, and dispose
water in the tank.
Place it on a level, stable
place and insert the power
plug into the socket.
●
There are two types of
filters in the unit.
●
Install the HEPA filter (the
thick one) while taking the
side with a tag as the front
side.
If it is installed reversely
inside out, the purifying
effect might not be
achieved.
●
The Active Carbon
Deodorizing filter does
not distinguish between
inside and outside.
●
Pull out the tag of the
HEPA filter in front of the
Active Carbon
Deodorizing filter in order
to facilitate removal.
The side with a tag is
the front side
No difference between
inside and outside
SUPPLY
●
May cause deformation or protection
device activation.
If there is a noise in TV/radio or
a radio clock does not display
the correct time, move the
product away as far as possible.
●
Do not use in the following places. (Otherwise, malfunction might be caused.)
●
With a lot of salt such as seaside area.
●
With a lot of machine oil.
●
With a lot of sulfide gas such as hot-spring area.
●
With a lot of steam or oily smokes.
●
Do not use any cosmetic products
*
formulated with fluororesin or silicone near the main unit.
Plasmacluster ion may not generate if fluororesin or silicone gets into the main unit.
*
Hair care products (hair coating solution, hair mousse, hair treatment), cosmetic products, antiperspirant,
antistatic products, waterproof spray, waxing products, glass cleaner, chemical cloth, wax, etc.
●
Bundle the power cord and hold
along with the handle to move.
Pulling on the power cord will
damage the power cord.
BEFORE USE
Take out the filters
(two types) from the
plastic bag
E - 20
E - 10
Содержание DW-E16FA
Страница 32: ...MEMO MEMO ...