WATER TANK
CONTINUOUS DRAINPIPE
3
4
2
Unplug the power plug
1
Rubber cap
Water tank
Tank groove
Hose
Drain outlet
14
HOW TO DRAIN
15
HOW TO DRAIN
Empty the
water tank
Put the water
tank back into
the unit
When the water tank is full, the dehumidifier will stop running
automatically. You need to empty the water tank and put it back into
the main unit. Otherwise, the dehumidifier cannot be restarted.
●
To prevent water overflow, pull
the water tank out slowly and
carry it around carefully. Do not
tilt or drop the water tank
●
●
Push in the water tank reliably
and properly
Do not push in the water tank
rashly (otherwise malfunction
may be caused)
Blinking
Beep, beep…
FULL
Water tank
groove (right)
Water tank
groove (left)
For continuous drainage, remove the rubber plug of water line with your
hands and connect a proper soft plastic pipe to the drainage mouth
through the drainage hole in the rear cover. The water tank will not be
filled with water when the dehumidifier operates continuously. In this
case, the dehumidifier can operate continuously and will not stop due to
protection when the water tank is full of water.
During continuous drainage, the drainpipe must be kept flat on the floor.
No part of the drainpipe can be folded or upturned, and the outlet of the
drainpipe cannot go deep under the liquid surface of another container;
otherwise water cannot be drained smoothly or drainage may stop.
Continuous
drainage
●
●
NOTE
●
Always stop the operation and dispose water before moving the main unit.
(Water in the tank may spill and damage household goods.)
Clean the inside of water tank periodically (about once a week).
(Failing to clean for a long period of time may increase mold and bacteria which causes bad odor.)
●
1
2
3
Drainage
hole plug
Continuous drainpipe
Pull it out straightly
After the water tank is removed, the
Tank full indicator blinks and the
operation stops.
Remove the
water tank
Uncover the drainage outlet
of the water tank to pour the
water away
dž
Take out the water tank
and take off the rubber
cap on the back side
Drain stopper
Continuous
drainage hole
While pressing the drain stop-
per with your right finger, run
the hose through the continu-
ous drainage hole on the back
of the main unit and securely
insert into drain outlet.
Press with your
right finger
Insert with your left hand
Recommended specifications of hoses to
be purchased separately: 12 mm (inner
diameter); 16 mm (outer diameter).
Do not use an old
hose with wide
opening.
(Otherwise, water
may leak.)
Make sure the hose is
inserted all the way in.
Set the water tank
to the main unit
