21
DV-SL
1500W
SYSTEM SETUP
SCREEN SAVER
ON*
OFF
DEFAULT
RESTORE
EXIT SETUP
–
TV TYPE
4:3PS*
4:3LB
16:9
PASSWORD
PARENTAL
LEVEL 1
↓
LEVEL 8
NO PARENTAL*
TV SYSTEM
NTSC* (PHILLIPINES)
PAL*
AUTO
Select the correct colour system (TV standard).
(for details, see page 25).
The screen mode should be set according to the
connected TV type (for details, see page 25).
A screen saver appears.
The screen saver is disabled.
Change the password (for details, see page 26).
Sets a restriction level for DVD viewing (for details, see
page 26).
Enter a 4-digit password.
It is set to 0000 by default.
This resets all setting, except for PARENTAL to the
factory defaults.
The setting is completed.
H
H
H
H
H
Change the system with conventional TV connecting
I
If you use a conventional TV, you must select the INTERLACE (I) mode from remote control direct button “I/P-SCAN”.
I
INTERLACE mode is use for a normal video output.
I
For conventional TV connection, please refer to page 11.
H
H
H
H
H
Change the system to a TV with Progressive-Scan
I
If you use TV with Progressive-Scan capability and connect it to the COMPONENT VIDEO OUT sockets of the DVD Video Player (see page 12, 13, 24), you
must select the PROGRESSIVE-SCAN (P-SCAN) mode from remote control direct button “I/P-SCAN”.
Note:
If you use a conventional TV and you select “P-SCAN” from remote control direct button “I/P-SCAN”, the TV screen will become blur (not clear).
Changing the system setup (continued)
Preparation for Use
Setup menu
Selectable parameters (* indicates default settings.)
Description
(*1) Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital’s dynamic range control allows you to adjust the sound range.
Caution:
Make sure the unit is on the STOP condition before changing the Interlace or P-Scan (Progressive Scan) mode.
DV-SL800W 17-24
1/26/06, 6:24 PM
21
