– 11 –
EN
C
C
Digital audio connection
You can make this connection using either a coaxial digital cable or an optical digital cable.
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs such as these is digitally
recorded by connecting the Player directly to a digital recorder (such as an MD player), the music may be recorded continu-
ously and track numbers may be lost.
C
C
Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
• Audio
CD
Audio CD discs can be transferred digitally to other equipment such as an MD recorder, play the disc as you would nor-
mally with the audio mode set to “L+R” and use the connection shown above. Audio CD’s recorded in the DTS format
cannot be transferred digitally or via analogue.
DVD
DVD’s recorded in Dolby Digital (5.1 channel), Dolby surround (Pro Logic), DTS or MPEG Audio cannot be connected digi-
tally to external recording equipment such as an MD recorder.
It may be possible to record Dolby Digital or MPEG Audio via a digital connection if the DVD player output is set to PCM
and down mix is set to ON (see page 19 “Audio Settings”). Analgue recording is possible but not for DTS recorded audio.
DVD discs with linear PCM audio should play normally.
COAXIAL
OPTICAL
DIGITAL IN
VIDEO
COMPONENT
R
L
Y
C
R
COAXIAL
OPTICAL
DIGITAL
AUDIO OUT
VIDEO OUT
S -VIDEO
C
B
Coaxial digital cable
(commercially available)
To optical digital
input jack
or
To OPTICAL
DIGITAL OUT jack
Optical digital cable
(commercially available)
To coaxial digital
input jack
To COAXIAL
DIGITAL OUT jack
Audio equipment with
optical/coaxial digital input jack
SETTING UP YOUR DVD PLAYER
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/DTS/ MPEG
Audio surround processor to your Player’s coaxial digital jack provides richer and more powerful audio play.
C
C
Digital connection to a processor or amplifier with an optical/ a coaxial digital input jack
You can make this connection using either a coaxial digital cable or an optical digital cable.
NOTES:
• This connection is not possible if the processor or amplifier to which you want to connect does not have an optical/coaxial
digital input jack.
• ANALOG AUDIO OUT and AV (TV) of the DVD player are not available on the DTS audio.
DVD Player
DIGITAL IN
COAXIAL
OPTICAL
VIDEO
COMPONENT
R
L
Y
C
R
COAXIAL
OPTICAL
DIGITAL
AUDIO OUT
VIDEO OUT
S -VIDEO
C
B
To optical digital
input jack
To coaxial digital
input jack
or
To OPTICAL
DIGITAL OUT jack
To COAXIAL
DIGITAL OUT jack
Optical digital cable
(commercially available)
Coaxial digital cable
(commercially available)
Dolby Digital (5.1 ch)/DTS/
MPEG Audio processor or amplifier
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TV’s 75-
ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and
video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of
the RF Modulator (usually marked “TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction sup-
plied with the RF Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable
from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked
“ANT IN”), then connect the RF modulator to your TV’s antenna terminal as described above.
NOTE
•
The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s antenna terminal
through an RF Modulator.
