20
DV-AT4000
SHARP
9
H
X5
5
7
6
9
1
5
0
Preparation f
o
r U
s
e
- Changing the initia
l setting of D
V
D -
Changing the initial setting of DVD (continued)
"
Video format
Note:
When playing the disc with a fixed video format, it will not change even if the TV
screen size is changed.
"
Rating level setting
Notes:
!
To change the rating level, enter a 4-digit password. It is set to 0000 by default.
!
While playing a disc with parental lock, the display may appear requesting a pass-
word in order to watch some restricted scenes. In such a case, enter the password
to temporarily change the rating level.
"
To change the password
When you forget your password
Indicator
Setting
4:3 LB
When playing a wide image (16:9) disc,
black bands are inserted at the top and
bottom and you can enjoy full wide im-
ages (16:9) on a 4:3 size TV.
A 4:3 disc is played in 4:3.
4:3 PS
When playing a wide image (16:9) disc,
the left and right sides of the image are
cut (pan scan) to display a natural-look-
ing 4:3 size image.
A wide image disc without pan scan
is played back in 4:3 letterbox.
A 4:3 disc is played in 4:3.
16:9
A wide image (16:9) is displayed when
playing a wide image (16:9) disc.
!
When playing a 4:3 image disc, the image size depends on the
setting of the connected TV.
!
If you play back a wide image (16:9) disc with this unit connected
to a 4:3 TV, the vertically shrunk image is displayed.
Indicator
Setting
8
DVD software of any grade (adult/general/children) can be played
back.
7 - 2
Only DVD software intended for general use and children can be
played back.
1
Only DVD software intended for children can be played back.
1
After pressing the button, press the MENU button.
2
Press the or button to select "System" and press the button.
3
Press the or button to select "Rating Level" and press the EN-
TER button.
4
Enter a 4-digit password with the direct buttons on the remote con-
trol and then press the ENTER button.
(Default setting: 0000)
5
Press the or button to select "New Password" and press the EN-
TER button.
6
Enter a 4-digit password with the direct buttons on the remote con-
trol and then press the button.
7
Enter the password again for confirmation.
8
Press the ENTER button.
9
Press the MENU button.
1
After pressing the button, press the MENU button.
2
Press the or button to select "System" and press the button.
3
Press the or button to select "Restore Setup Infor" and press the button.
4
Enter 1397 with the direct buttons and then press the ENTER button.
When resetting is done according to this method, all settings, including the settings
for password and parental level, will be reset to the factory defaults.
