Sharp DT 200 - Home Theater TV Projector страница 44 Скачать руководство пользователя

Страница: 44 / 59

E-43

Maintenance &

oubleshooting

Lamp/Maintenance Indicators

Problem

• Blocked air intake.

• Clogged ventilative hole.

• Cooling fan breakdown.
• Internal circuit failure.

• Burnt-out lamp.
• Lamp circuit failure.

• Lamp has been used for

over 2,400 hours.

Maintenance Indicator

The internal
temperature is
abnormally high.

TEMPERATURE
WARNING indicator

Condition

Possible Solution

• Relocate the projector to an area with

proper ventilation.

• Clean the ventilative holes.

(See page 48.)

• Take the projector to your nearest Sharp

Authorized Service Center or Dealer for
repair.

• Carefully replace the lamp. (See page 45.)
• Take the projector to your nearest Sharp

Authorized Service Center or Dealer for
repair.

Maintenance Indicators

• The warning lights on the projector indicate problems

inside the projector.

• There are two types of warning lights: a TEMPERATURE

WARNING indicator that warns you when the projector
is too hot, and a LAMP REPLACEMENT indicator that
warns you when to change the lamp.

• If a problem occurs, either the TEMPERATURE

WARNING indicator or the LAMP REPLACEMENT
indicator will illuminate in red. After turning off the
power, follow the procedures given below.

• If the TEMPERATURE WARNING indicator lights up, follow the above possible solutions and then wait until the projector has

cooled down completely before turning the power back on. (At least 5 minutes.)

• If the power is turned off and then turned on again, for example during a brief rest, the LAMP REPLACEMENT indicator may

be triggered, preventing the power from going on. Should this occur, unplug the power cord from the wall outlet and plug it
back in again.

TEMPERATURE
WARNING
indicator

POWER
indicator

LAMP
REPLACEMENT
indicator

LAMP REPLACE-
MENT indicator

The lamp does not
light up.

The lamp requires
replacement.

TEMP.

LAMP

POWER

DT-200(E)#p43.p65

02.11.21, 11:47 AM

Содержание DT 200 - Home Theater TV Projector




























































Результаты поиска

Содержание DT 200 - Home Theater TV Projector

Отзывы:

Похожие инструкции для DT 200 - Home Theater TV Projector

Бренды по названию

Популярные бренды

Sharp DT 200 - Home Theater TV Projector, Руководство по эксплуатации

Результаты поиска

Содержание DT 200 - Home Theater TV Projector

Отзывы:

Похожие инструкции для DT 200 - Home Theater TV Projector

Бренды по названию

Популярные бренды