16
Before Using the Handset
SH-02J_E_02.fm
[16/30]
■
Removing docomo nano UIM card
1
Open the docomo nano UIM Card and microSD
Card cover
2
Remove the tray from the docomo nano UIM
card slot
3
Remove the docomo nano UIM card from the
tray
4
Insert the tray slowly into the docomo nano UIM
card slot
5
Close the docomo nano UIM Card and microSD
Card cover
The internal battery is not fully charged at the time of
purchase. Be sure to charge the battery before use.
■
Cautions while charging
For details on the estimated charge time
>
The battery can also be charged with the handset turned on
(While charging, the battery icon appears with [
]
superimposed).
Do not charge for a long time with the power left turned on. If the
handset is left turned on after charging is complete, the internal
battery charge level decreases.
In this case, an AC or DC adapter (sold separately) charges the
battery again. However, depending on the time when the
handset is disconnected from the AC or DC adapter, the battery
charge level may be low or the battery may only be usable for a
short time.
If the handset is left for a long time even after the charging is
completed, the battery level may decrease.
When the battery is empty and the handset is being charged, the
charging lamp may not illuminate immediately. However,
charging is in progress.
If the battery empty alert is displayed and the power cannot be
turned on, charge the battery for a while.
While charging, the handset may not be turned on even when the
charging lamp is illuminated in red. Charge longer and try turning
the power on again.
Frequently recharging the battery when its power is still
remaining enough may shorten the usable life of the internal
battery. It is recommended to use the battery to a certain level
(e.g. after the battery level decreases) before recharging.
When the battery becomes warm, charging may automatically
stop even if the battery has not been fully charged. Charging
automatically resumes after the temperature lowers to an
appropriate temperature.
■
Estimated battery life when fully charged
For details on the battery life
Do not allow the docomo nano UIM card or tray to fall when
removing them.
Make sure not to touch or damage the IC (gold) of the docomo
nano UIM card when handling it. Also, note that inserting or
removing the docomo nano UIM card forcibly may damage it or
deform the tray.
Refer to the docomo nano UIM card user's guide or the
DOCOMO website for more information on the docomo nano
UIM card.
Do not misplace the docomo nano UIM card once it is removed.
IMEI plate
A plate on which the IMEI number (International Mobile
Equipment Identifier) is printed is stowed near the docomo
nano UIM card slot. The IMEI number is required when you
contact a repair counter that DOCOMO specifies, so do not pull
it out.
Note that pulling out the IMEI plate forcibly or adding forces on
it may damage the plate.
If you accidentally pull out the IMEI plate, slowly return the IMEI
plate to the original position while taking care not to insert it too
deep.
Charging
Continuous
talk time
FOMA/3G
Approx. 900 min
GSM
Approx. 870 min
VoLTE (Voice call)
Approx. 900 min
Continuous
stand-by time
FOMA/3G
At rest: Approx. 900 hr (Preferred network
type: 4G/3G/GSM(Auto))
GSM
At rest: Approx. 760 hr (Preferred network
type: 4G/3G/GSM(Auto))
LTE
At rest: Approx. 780 hr (Preferred network
type: 4G/3G/GSM(Auto))
SH-02J_E.book 16 ページ ２０１６年１１月１０日 木曜日 午後４時４４分
