E-17
ENGLISH
DK-UH2
DK-UH2(BK)
Advanced Features
Timer and sleep operation (continued)
Snooze function
Once timer has started, pressing the SNOOZE/DIMMER button will
stop timer for 5 minutes.
Within this period, the “TIMER” indicator will be blinking.
Once the snooze time has expired, timer will continue.
To turn off the snooze function
During snooze mode, press and hold the SNOOZE/DIMMER button
for 2 seconds to turn it off.
The “TIMER” indicator will stop blinking.
Sleep operation
The USB can be turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLP” is indicated.
To cancel the sleep operation without setting the unit to the power
stand-by mode, proceed as follows.
To use sleep and timer operation together
Sleep and timer:
1
Playback the USB.
2
Press the SLEEP button repeatedly on remote control to
select sleep time.
3
Press the MEMORY button.
“SLP” will appear.
4
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
1
Whilst “SLP” is indicated, pressing the SLEEP button will display
“SLEEP XXX”.
“XXX” is remaining sleep time.
The remaining sleep time is displayed for about 5 seconds.
You can change the remaining sleep time whilst it is displayed
by pressing the SLEEP button (steps 2 - 3).
1
Whilst “SLP” is indicated, press the SLEEP button repeatedly to
select “SLEEP OFF”, and press the MEMORY button.
1
Set the sleep time (see left, steps 1 - 4).
2
Whilst the sleep timer is set, set the timer (steps 1 - 6, page 16).
Sleep timer setting
Timer setting
Sleep operation will
automatically stop
Timer start time
End time
10 minutes - 2 hours
30 minutes
