background image

NOTES FOR USERS IN THE U.K. AND IRELAND

The mains lead of this product is tted with a non-rewireable

(moulded) plug incorporating a

10

A fuse. Should the fuse need to

be replaced, a BSI or ASTA approved BS 1362 fuse marked

or

and of the same rating as above, which is also indicated on

the pin face of the plug must be used.
Always re t the fuse cover after replacing the fuse. Never use

the plug without the fuse cover tted.
In the unlikely event of the socket outlet in your home not being

compatible with the plug supplied, cut-off the mains plug and t

an appropriate type.

DANGER:

The fuse from the cut-off plug should be removed and the cut-off

plug destroyed immediately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted else-

where into a 13A socket outlet as a serious electric shock may

occur.

To t an appropriate plug to the mains lead, follow the instruc-

tions below:

IMPORTANT:

The wires in the mains lead are coloured in accordance with the

following code:

Blue

: Neutral

Brown : Live
As the colours of the wires in the mains lead of this product may

not correspond with the coloured markings identifying the termi-

nals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the plug

terminal which is marked N or coloured black.

The wire which is coloured brown must be connected to the

plug terminal which is marked L or coloured red.

Ensure that neither the brown nor the blue wire is connected to

the earth terminal in your three pin plug.
Before replacing the plug cover, make sure that:

If the new

d plug contains a fuse, its value is the same as

that removed from the cut-off plug.

The cord grip is clamped over the sheath of the mains lead

and not simply over the lead wires.

IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELEC-

TRICIAN.

SERVICE INFORMATION

In the unlikely event of your equipment requiring repair, please

contact the dealer or supplier from whom it was purchased. Where

this is not possible, please visit our web-site www.sharp.co.uk/

customersupport.aspx

Customers without internet access may telephone 0845 

880 0512 during of ce hours (or (01) 676 0648 if telephoning

from lreland).

Please note; all calls will be charged at local rate.
Certain replacement parts and accessories may be obtained from

our main parts distributor.

WILLOW VALE ELECTRONICS LTD.

0121 766 5414

In the unlikely event of this equipment requiring repair during the

guarantee period, you will need to provide proof of the date of

purchase to the repairing company.

Please keep your invoice or receipt, which is supplied at the

time of purchase.

For U.K. and Ireland customers

For U.K. and Ireland customers

Information on Proper Disposal

A.Information on Disposal for Users (private households)

1. In the European Union

Attention: If you want to dispose of this equipment, please do not use the ordinary dustbin! 

Used  electrical  and  electronic  equipment  must  be  treated  separately  and  in  accordance  with

legislation that requires proper treatment, recovery and recycling of used electrical and electronic

equipment.

Following  the  implementation  by  member  states,  private  households  within  the  EU  states  may

return  their  used  electrical  and  electronic  equipment  to  designated  collection  facilities  free  of

charge*. 

In some countries* your local retailer may also take back your old product free of charge if you

purchase a similar new one.

*)  Please contact your local authority for further details.

If your used electrical or electronic equipment has batteries or accumulators, please dispose of

these separately beforehand according to local requirements.

By disposing of this product correctly you will help ensure that the waste undergoes the necessary

treatment, recovery and recycling and thus prevent potential negative effects on the environment

and human health which could otherwise arise due to inappropriate waste handling.

2. In other Countries outside the EU

If you wish to discard this product, please contact your local authorities and ask for the correct

method of disposal.  

For Switzerland: Used electrical or electronic equipment can be returned free of charge to the

dealer,  even  if  you  don't  purchase  a  new  product.  Further  collection  facilities  are  listed  on  the

homepage of www.swico.ch or www.sens.ch.

B.Information on Disposal for Business Users

1. In the European Union

If the product is used for business purposes and you want to discard it:

Please contact your SHARP dealer who will inform you about the take-back of the product. You

might be charged for the costs arising from take-back and recycling. Small products (and small

amounts) might be taken back by your local collection facilities.

For Spain: Please contact the established collection system or your local authority for take-back of

your used products.

2. In other Countries outside the EU

If you wish to discard of this product, please contact your local authorities and ask for the correct

method of disposal.

Attention: Your 

product is marked 

with this symbol. It 

means that used 

electrical and 

electronic products 

should not be mixed 

with general 

household waste. 

There is a separate 

collection system for 

these products.

Information on Battery Disposal

The battery supplied with this product contains traces of Lead. 

For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household

waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in

accordance  with  legislation.  Please  contact  your  local  authority  for  details  on  the  collection  and  recycling

schemes.

For Switzerland: The used battery is to be returned to the selling point.

For other non-EU countries: Please contact your local authority for correct method of disposal of the used

battery.

DK-KP82PH_OM_EN_SCA.indd   26

2013-02-26   07:33:26

Содержание DK-KP82PH





























Отзывы: