Sharp CP-HP707 Скачать руководство пользователя

Страница: 31 / 36

XL-HP707

Adv

anced F

eatures

Enhancing your system

The connection cord is not included. Purchase a commercially avail-
able cord as shown below.

Auto power on function:

When you press any of the following buttons, the unit turns on.

VIDEO/AUX button (main unit and remote control): The unit turns
on and the "VIDEO" function is activated.

/ button on the main unit: The unit turns on and playback of

the last function starts (CD/TAPE/TUNER/VIDEO).

Listening to the playback sounds from VCR,
DVD, etc.

Note:

To prevent noise interference, place the unit away from the televi-
sion.

To record on a tape

Headphones

Before plugging in or unplugging the headphones, reduce the
volume.

Be sure your headphones have a 1/8" (3.5 mm) diameter plug
and are between 16 ohms and 50 ohms impedance. The recom-
mended impedance is 32 ohms.

Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.

VCR, DVD, etc.

To the line
output jacks

Red

RCA cord
(not supplied)

White

Red White

Use a connection cord to connect the VCR, DVD, etc. to the
VIDEO/AUX IN jacks.

When using video equipment, connect the audio output to this
unit and the video output to a television.

Press the ON/STAND-BY button to turn the power on.

Press the VIDEO/AUX button.

Play the connected equipment.

Insert a cassette in the cassette compartment.

Press the VIDEO/AUX button.

Press the

button.

Press the / ( ) or ( ) button.

Play the VCR, DVD, etc.

Содержание CP-HP707





































Результаты поиска

Содержание CP-HP707

Отзывы:

Похожие инструкции для CP-HP707

Бренды по названию

Популярные бренды

Sharp CP-HP707, Руководство по эксплуатации

Результаты поиска

Содержание CP-HP707

Отзывы:

Похожие инструкции для CP-HP707

Бренды по названию

Популярные бренды