background image

3

XL-HP707

Imp

ortant Ins

truction

IMPORTANT SAFETY INSTRUCTIONS

1

Read Instructions - 

All the safety and operating instructions should

be read before the product is operated.

2

Retain Instructions - 

The safety and operating instructions should be

retained for future reference.

3

Heed Warnings - 

All warnings on the product and in the operating

instructions should be adhered to.

4

Follow Instructions - 

All operating and use instructions should be

followed.

5

Cleaning - 

Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.

6

Attachments - 

Do not use attachments not recommended by the prod-

uct manufacturer as they may cause hazards.

7

Water and Moisture - 

Do not use this product near water - for ex-

ample, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.

8

Accessories - 

Do not place this product on an unstable cart, stand,

tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufac-
turer, or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mounting ac-
cessory recommended by the manufacturer.

9

A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to over-
turn.

10

Ventilation - 

Slots and openings in the cabinet are provided for venti-

lation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or cov-
ered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been
adhered to.

11

Power Sources - 

This product should be operated only from the type

of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.

12

Grounding or Polarization -

 This product may be equipped with a

polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.

Alternate Warnings - 

This product is equipped with a three-wire

grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.

13

Power-Cord Protection - 

Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the product.

14

Protective Attachment Plug - 

The product is equipped with an at-

tachment plug having overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the
same overload protection as the original plug.

Содержание CP-HP707





































Отзывы: