Sharp CP-E9000H страница 32 Скачать руководство пользователя

Страница: 32 / 104

MD-E9000H

– 32 –

Can't REC

• Errors occurred 10 times continuously in the REC-PLAY

• Check for scratch, dust, fingerprints, or black spots on

mode.

the disc. Check that the disc is not eccentric or largely

• In the REC-PLAY mode, recording enable cluster became

deflected.

0 due to errors.

• Cannot read the address. The unit cannot enter the REC

mode for 20 seconds regardless of repetitive tries.

Can't COPY

• During the REC-PAUSE or REC-PLAY mode, the disc was

• Check if it is the copy-prohibited disc (Example: CD-R

judged as follows according to the channel status of the

etc.).

digital signal input at D-IN:

It is not an audio disc.

It is not for public use.

Due to the inversion of COPY bit on the CD, the

contents cannot be copied.

NO SIG.

• During the REC-PAUSE, REC-PLAY, or CD FUNC playback

• Check for an abnormality with the D-IN signal line.

mode, the following occurred responding to the digital signal
input at D-IN:

Digital IN PLL is unlocked.

PLL is locked even if FS is not 44.1 kHz.

TOC FULL

• There is no space left for track numbers or character

• Replace the disc with the one on which the space for

information (track names, disc name, etc.).

recording UTOC is left.

• No recordable space was found when entering the REC-

PAUSE mode.

Can't READ u

• FTNO > LTNO has been recognized.

• There is an error with UTOC data. Replace the disc.

• FTNO is not 0 or 1.
• Cannot read UTOC recorded on the disc.

TOC FROM a

• The start address > end address has been recognized.

• There is an error with UTOC data. Replace the disc.

TOC FROM L0-4

• One of UTOC 0-4 data is looping.

• There is an error with UTOC data. Replace the disc.

NOT AUDIO

• Non-audio data is recorded in the track mode of currently

• Select another track number or replace the disc.

selected track number.

? DISC

• The ASCII codes data "MINI" of the system ID written in

• This is a nonstandard disc. Replace the disc and

TOC is not correct.

check.

• The disc type written in TOC does not belong to either of

the pre-master MD, recording MD or hybrid MD.

DISC FULL

• No recordable space was found when entering the REC-

• Replace the disc with the one on which the recording

PAUSE mode.

space for UTOC is left.

PROTECT

• You tried recording or editing on a disc with the erase-

• Move the tab back to its original position and try

prevention tab moved.

recording or editing again.

• You tried editing the track that is write-protected due to the

* Try editing other tracks that are not write-protected.

information written in UTOC.

Can't EDIT

• Conditions in each editing function have not been satisfied. • The unit is not operated properly. Try again in right

procedures.

TEMP OVER

• The temperature inside of the set (MD unit) becomes too

• Check the remedy on the troubleshooting chart.

high due to an error.

• Is the unit used in a place of high temperature?

Can't READ r

• The read data is not correct, or data has not been

• There may be an error in TOC or UTOC data or

Can't READ s

read properly.

scratches on the disc. Replace the disc.

Can't READ w

• An error occurred while recording sound data, and

the recording could not be completed.

Can't READ s

• The read data is not correct.

• TOC information on the disc does not comply with the

Can't READ r

• TOC information cannot be read.

MD standard. Replace the disc.

• There may be scratches on the disc. Replace the disc.

Can't WRITE

• An error occurred while overwriting UTOC, and it could not

• There may be scratches on the disc. Replace the disc.

be overwritten properly.

BLANK MD

• Although UTOC is read, total number of letters of TNO and

• Check that the disc is a recordable disc by recording on it.

NAME is 0.

Er-MD41

• UTOC can be read but cannot be overwritten.

• Is the recording head positioned properly? Check the

connection between the PWB and recording head.

Er-MD80

• EEPROM data is not correct.

• Reset the unit and try again. If it does not restore the

unit, replace EEPROM.

Power?

• Due to the abnormality with the power supply, MD unit

• Reset the unit and try again. If it does not restore the

cannot be operated properly.

unit, the power supply circuit is defective. Check the
DC voltage of Q550 E , and Q580 E .

MD error messages

ERROR MESSAGE LIST

Error Display

Error Message

Remarks

Содержание CP-E9000H









































































































Результаты поиска

Содержание CP-E9000H

Отзывы:

Похожие инструкции для CP-E9000H

Бренды по названию

Популярные бренды

Sharp CP-E9000H, Руководство по обслуживанию

Результаты поиска

Содержание CP-E9000H

Отзывы:

Похожие инструкции для CP-E9000H

Бренды по названию

Популярные бренды