HTCN550DVW3_6_E.fm
07/7/30
ENGLISH
HT-CN550DVW3
E
E-20
Preparation for Use
- Chang
in
g
t
h
e
se
tup menu -
Change the system with conventional TV connecting
z
If you use a conventional TV, you must select the INTERLACE at “Video Setup Page” (see page 21).
z
INTERLACE mode is use for normal video output.
z
For conventional TV connection, please refer to page 13.
Change the system to a TV with Progressive-Scan
z
If you use TV with Progressive-Scan capability and connect it to the COMPONENT VIDEO OUT sockets of the DVD main unit (see page 14), you must select the
PROGRESSIVE-SCAN (P-SCAN).
Setup menu
Selectable parameters (* indicates default setting)
Description
GENERAL
SETUP
PAGE
TV DISPLAY
NORMAL/PS*
NORMAL/LB
WIDE
WIDE SQUEEZE
The screen mode should be set according to the connected TV type (for
details, see page 23).
ANGLE MARK ON*
OFF
OSD LANG
ENGLISH*
RUSSIAN
FRENCH
SPANISH
You can select the desired OSD (On Screen Display) language for the
setup menu or playback control screen.
SCREEN
SAVER
ON* A
screensaver
appears.
OFF
The screensaver is disabled.
LAST
MEMORY
ON
If accidently push ON/STAND-BY or OPEN/CLOSE button during
playback mode, you can resume playback from the point playback is
stopped after power on back or you push the OPEN/CLOSE button to
close the disc tray.
OFF*
Last memory not function.
AUDIO
SETUP
PAGE
SPEAKER
SETUP
TEST TONE
ON
OFF*
You can check speaker output (see page 47).
DOLBY
DIGITAL
SETUP
DYNAMIC(*1)
FULL
Audio with fully compressed dynamic range.
3/4
1/4
Audio with partially compressed dynamic range.
OFF*
Audio with uncompressed dynamic range.
CHANNEL
DELAY
Adjust the delay time of the speakers (for details, see page 46).
(*1)
Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital's dynamic range control allows you to adjust the sound range.
