24
(Main unit operation)
(Continued)
(Main unit operation)
■
To manually recall the stations stored in
memory
Press the PRESET (
X
or
W
) button.
●
Each time the button is pressed, the channel number will
change.
●
After the channel number has been displayed for 2 sec-
onds, the frequency for that channel will appear for 2 sec-
onds, and then the station name will appear.
■
To switch the display
Each time the DISPLAY MODE button is pressed whilst an FM
station is tuned in, the display will switch as follows:
Station
→
Programme
→
Radio text
→
Frequency
name (PS)
type (PTY)
(RT)
↑
When the station you are tuning in is not an RDS station or
even if it is an RDS station but it is very weak signal, the dis-
play will change in the following order:
“NO PS”
→
“NO PTY”
→
“NO RT”
→
Frequency
↑
Notes:
●
“NO PS”, “NO PTY” or “NO RT” will flash for about 5 sec-
onds, and then the frequency will be displayed.
●
The display can only be switched whilst tuned to the FM
band.
■
Notes for Radio text
●
The radio text for 8 characters will be displayed steadily for
4 seconds and then it will scroll across the display.
●
If you tune into a station which is not broadcasting any radio
text, even if it is an RDS station, when you switch to the
radio text position “NO RT” will be displayed.
●
Whilst radio text data is being received or when the text
contents change, “RT” will be displayed.
■
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty.
●
“PS”, “NO PS” and a station name appear alternately, and
the unit does not operate properly.
●
If a particular station is not broadcasting properly or a sta-
tion is conducting tests, the RDS reception function may
not work properly.
●
When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed, even
if “RDS” is lit.
http://www.usersmanualguide.com/
