20
Radio
– Listening to the Radio –
Listening to the Radio
1
Press the POWER button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING (
X
X
X
X
X
or
W
W
W
W
W
) button to tune in to the desired sta-
tion.
Manual tuning:
Press the TUNING (
X
or
W
) button as many times as required to tune in to the
desired station.
Auto tuning:
When the TUNING (
X
or
W
) button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first receivable
broadcast station.
Notes:
●
When radio interference occurs, auto scan tuning may stop automatically at
that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING (
X
or
W
) button again.
To receive an FM stereo transmission:
Press the ST-MODE button on the remote control to display the “ST” indicator.
●
“
j
” will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the ST-MODE button. The “ST” indicator goes
out. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the POWER button to enter the power stand-by mode.
FM stereo mode indicator
FM stereo receiving indicator
■
Sound Control (See page 14.)
