6
R-310AK
R-330AK
R-330AW
Pin No.
Signal
I/O
Description
LSI(IZA758DR) : R-310AK
The I/O signal of the LSI(IZA758DR) is detailed in the following table.
Pin No.
Signal
I/O
Description
67
SEG23
OUT
Terminal not used.
68-74
SEG22-SEG16
OUT
Segment data signal.
Signal similar to SEG27.
75
SEG15
OUT
Terminal not used.
76-82
SEG14-SEG8
OUT
Segment data signal.
Signal similar to SEG27.
83
SEG7
OUT
Terminal not used.
84-90
SEG6-SEG0
OUT
Segment data signal.
Signal similar to SEG27.
91/92
VCC/VREF
IN
Connected to GND.
93
AVSS
IN
Connected to VC.
94
COM3
OUT
Common data signal: COM3.
Connected to LCD (Pin No. C0).
95
COM2
OUT
Common data signal: COM2.
Connected to LCD (Pin No. C1).
96
COM1
OUT
Common data signal: COM1.
Connected to LCD (Pin No. C2).
97
COM0
OUT
Common data signal: COM0.
Connected to LCD (Pin No. C3).
98-99
VL3-VL2
IN
Power source voltage input terminal.
Standard voltage for LCD.
100
C2
IN
Terminal not used.
1-12
SEG0-SEG11
OUT
Segment data signal.
Connected to LCD.
The relation between signals are as follows:
LSI signal (Pin No.)
LCD (Pin No.)
LSI signal (Pin No.)
LCD (Pin No.)
SEG 0 (1) ................................... S12
SEG 6 (7) .................................... S6
SEG 1 (2) ................................... S11
SEG 7 (8) .................................... S5
SEG 2 (3) ................................... S10
SEG 8 (9) .................................... S4
SEG 3 (4) ..................................... S9
SEG 9 (10) .................................. S3
SEG 4 (5) ..................................... S8
SEG 10 (11) ................................ S2
SEG 5 (6) ..................................... S7
SEG 11(12) ................................. S1
13
R60
IN
Signal coming from touch key.
When either G12 line on key matrix is touched, a corresponding signal out of R73, R81-R83
and R90-R91 will be input into R60. When no key is touched, the signal is held at "H" level.
14
R61
IN
Signal similar to R60.
When either G11 line on key matrix is touched, a corresponding signal will be input into R61.
15
R62
IN
Signal similar to R60.
When either G10 line on key matrix is touched, a corresponding signal will be input into R62.
16
R63
IN
Signal similar to R60.
When either G9 line on key matrix is touched, a corresponding signal will be input into R63.
17
AIN0
IN
To input signal which communicates the door open/close information to LSI.
Door close "H" level signal (0V). Door open "L" level (-5V)
18-20
AIN1-AIN3
IN
Terminal to change functions according to the Model.
By using the A/D converter contained in the LSI, DC voltage in accordance with the Model
in operation is applied to set up its function.
21
VSS
IN
Power source voltage: -5V
VSS voltage of power source circuit input.