113
1-BIT PORTABLE MINIDISC RECORDER MD-DR7
ENGLISH OPERA
TION MANUAL
To cancel synchronous recording
Press the
button.
Long recording
(pages 34 - 35)
2 times or 4 times long stereo recording is possible.
You can make a recording in the monaural mode for twice as long
as in the stereo mode (SP).
1. Press the REC button.
2. Press the MENU button.
3. Select “REC MODE” by pressing the
or
button,
and then press the MENU button again.
4. Select the recording mode by pressing the
or
but-
ton, and then press the MENU button.
For an 80 minute MiniDisc:
SP/STEREO
80 minutes in stereo
LP2
160 minutes in stereo
LP4
320 minutes in stereo
SP/MONO
160 minutes in mono
5. Start recording (manual, synchronous, trace-back).
Creating track numbers automatically
(page 37)
You can select the numbering method for analog recording from
audio equipment or a microphone.
1. Press the MENU button while recording is paused or in
progress.
2. Press the
or
button to select “MARK” and press
the MENU button again.
3. Press the
or
button to select the numbering
method.
For audio equipment: LEVEL-AUTO (numbering with si-
lence lasting 1 second or more), TIME 10min, TIME 5min,
TIME 3min, OFF
For microphone: TIME 10min, TIME 5min, TIME 3min, OFF
4. Press the MENU button.
Creating track numbers manually
(page 38)
Press the REC button at the point where you wish to create a
track number while recording. The track number increases by
one.
You can also use the BASS button on the remote control.
Group recording
(pages 39 - 41)
You can record tracks by the group of artists, albums, etc.
The MiniDisc can be played back by selecting the group.
1. Press the REC button.
2. Press the GROUP button for 2 seconds or more. “GR” will
flash.
To cancel group recording, press the GROUP button for 2
seconds or more until "GR" goes out.
3. Press the MENU button.
4. Select “GrSELECT” by pressing the
or
button, and
then press the MENU button.
5. Select a group by pressing the
or
button and press
the MENU button.
The unit displays “GR01”, “GR02”, “GR03”... or group names if
given. For non-grouped recording, select “Non GROUP”.
6. Start recording (manual, synchronous, trace-back).